The study of deep holes accuracy and surface roughness after gun drilling

S. V. Kirsanov, Artem Sergeevich Babaev

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

Results of industrial tests of gun drills with diameter of 2.05 mm with carbide and steel stems are given. It is shown that the gun drills with cemented carbide stem and especially war-resistance coatings have a greater wear resistance and ensure lower surface roughness of the drilled holes.

Original languageEnglish
Title of host publicationProceedings of 2014 International Conference on Mechanical Engineering, Automation and Control Systems, MEACS 2014
PublisherInstitute of Electrical and Electronics Engineers Inc.
ISBN (Electronic)9781479962211
DOIs
Publication statusPublished - 1 Jan 2014
Event2014 International Conference on Mechanical Engineering, Automation and Control Systems, MEACS 2014 - Tomsk, Russian Federation
Duration: 16 Oct 201418 Oct 2014

Conference

Conference2014 International Conference on Mechanical Engineering, Automation and Control Systems, MEACS 2014
CountryRussian Federation
CityTomsk
Period16.10.1418.10.14

Keywords

  • diameter
  • gun drill
  • roughness
  • SEM
  • wear
  • wear-resistant coating

ASJC Scopus subject areas

  • Mechanical Engineering
  • Electrical and Electronic Engineering
  • Control and Systems Engineering

Fingerprint Dive into the research topics of 'The study of deep holes accuracy and surface roughness after gun drilling'. Together they form a unique fingerprint.

  • Cite this

    Kirsanov, S. V., & Babaev, A. S. (2014). The study of deep holes accuracy and surface roughness after gun drilling. In Proceedings of 2014 International Conference on Mechanical Engineering, Automation and Control Systems, MEACS 2014 [6986950] Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/MEACS.2014.6986950