The Selection of Computed Tomography Scanning Schemes for Lengthy Symmetric Objects

V. B. Trinh, Y. Zhong, S. P. Osipov

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

The article describes the basic computed tomography scan schemes for lengthy symmetric objects: continuous (discrete) rotation with a discrete linear movement; continuous (discrete) rotation with discrete linear movement to acquire 2D projection; continuous (discrete) linear movement with discrete rotation to acquire one-dimensional projection and continuous (discrete) rotation to acquire of 2D projection. The general method to calculate the scanning time is discussed in detail. It should be extracted the comparison principle to select a scanning scheme. This is because data are the same for all scanning schemes: the maximum energy of the X-ray radiation; the power of X-ray radiation source; the angle of the X-ray cone beam; the transverse dimension of a single detector; specified resolution and the maximum time, which is need to form one point of the original image and complies the number of registered photons). It demonstrates the possibilities of the above proposed method to compare the scanning schemes. Scanning object was a cylindrical object with the mass thickness is 4 g/cm2, the effective atomic number is 15 and length is 1300 mm. It analyzes data of scanning time and concludes about the efficiency of scanning schemes. It examines the productivity of all schemes and selects the effective one.

Original languageEnglish
Article number012024
JournalIOP Conference Series: Materials Science and Engineering
Volume189
Issue number1
DOIs
Publication statusPublished - 18 Apr 2017

Fingerprint

Tomography
Scanning
X rays
Radiation
Cones
Photons
Productivity
Detectors

ASJC Scopus subject areas

  • Materials Science(all)
  • Engineering(all)

Cite this

The Selection of Computed Tomography Scanning Schemes for Lengthy Symmetric Objects. / Trinh, V. B.; Zhong, Y.; Osipov, S. P.

In: IOP Conference Series: Materials Science and Engineering, Vol. 189, No. 1, 012024, 18.04.2017.

Research output: Contribution to journalArticle

@article{dbbe68de32604c3b891e1351500a7ba7,
title = "The Selection of Computed Tomography Scanning Schemes for Lengthy Symmetric Objects",
abstract = "The article describes the basic computed tomography scan schemes for lengthy symmetric objects: continuous (discrete) rotation with a discrete linear movement; continuous (discrete) rotation with discrete linear movement to acquire 2D projection; continuous (discrete) linear movement with discrete rotation to acquire one-dimensional projection and continuous (discrete) rotation to acquire of 2D projection. The general method to calculate the scanning time is discussed in detail. It should be extracted the comparison principle to select a scanning scheme. This is because data are the same for all scanning schemes: the maximum energy of the X-ray radiation; the power of X-ray radiation source; the angle of the X-ray cone beam; the transverse dimension of a single detector; specified resolution and the maximum time, which is need to form one point of the original image and complies the number of registered photons). It demonstrates the possibilities of the above proposed method to compare the scanning schemes. Scanning object was a cylindrical object with the mass thickness is 4 g/cm2, the effective atomic number is 15 and length is 1300 mm. It analyzes data of scanning time and concludes about the efficiency of scanning schemes. It examines the productivity of all schemes and selects the effective one.",
author = "Trinh, {V. B.} and Y. Zhong and Osipov, {S. P.}",
year = "2017",
month = "4",
day = "18",
doi = "10.1088/1757-899X/189/1/012024",
language = "English",
volume = "189",
journal = "IOP Conference Series: Materials Science and Engineering",
issn = "1757-8981",
publisher = "IOP Publishing Ltd.",
number = "1",

}

TY - JOUR

T1 - The Selection of Computed Tomography Scanning Schemes for Lengthy Symmetric Objects

AU - Trinh, V. B.

AU - Zhong, Y.

AU - Osipov, S. P.

PY - 2017/4/18

Y1 - 2017/4/18

N2 - The article describes the basic computed tomography scan schemes for lengthy symmetric objects: continuous (discrete) rotation with a discrete linear movement; continuous (discrete) rotation with discrete linear movement to acquire 2D projection; continuous (discrete) linear movement with discrete rotation to acquire one-dimensional projection and continuous (discrete) rotation to acquire of 2D projection. The general method to calculate the scanning time is discussed in detail. It should be extracted the comparison principle to select a scanning scheme. This is because data are the same for all scanning schemes: the maximum energy of the X-ray radiation; the power of X-ray radiation source; the angle of the X-ray cone beam; the transverse dimension of a single detector; specified resolution and the maximum time, which is need to form one point of the original image and complies the number of registered photons). It demonstrates the possibilities of the above proposed method to compare the scanning schemes. Scanning object was a cylindrical object with the mass thickness is 4 g/cm2, the effective atomic number is 15 and length is 1300 mm. It analyzes data of scanning time and concludes about the efficiency of scanning schemes. It examines the productivity of all schemes and selects the effective one.

AB - The article describes the basic computed tomography scan schemes for lengthy symmetric objects: continuous (discrete) rotation with a discrete linear movement; continuous (discrete) rotation with discrete linear movement to acquire 2D projection; continuous (discrete) linear movement with discrete rotation to acquire one-dimensional projection and continuous (discrete) rotation to acquire of 2D projection. The general method to calculate the scanning time is discussed in detail. It should be extracted the comparison principle to select a scanning scheme. This is because data are the same for all scanning schemes: the maximum energy of the X-ray radiation; the power of X-ray radiation source; the angle of the X-ray cone beam; the transverse dimension of a single detector; specified resolution and the maximum time, which is need to form one point of the original image and complies the number of registered photons). It demonstrates the possibilities of the above proposed method to compare the scanning schemes. Scanning object was a cylindrical object with the mass thickness is 4 g/cm2, the effective atomic number is 15 and length is 1300 mm. It analyzes data of scanning time and concludes about the efficiency of scanning schemes. It examines the productivity of all schemes and selects the effective one.

UR - http://www.scopus.com/inward/record.url?scp=85018370222&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85018370222&partnerID=8YFLogxK

U2 - 10.1088/1757-899X/189/1/012024

DO - 10.1088/1757-899X/189/1/012024

M3 - Article

VL - 189

JO - IOP Conference Series: Materials Science and Engineering

JF - IOP Conference Series: Materials Science and Engineering

SN - 1757-8981

IS - 1

M1 - 012024

ER -