The research of a pulse laser powder materials' sintering process

Research output: Contribution to journalArticle

2 Citations (Scopus)

Abstract

During the research the following problem was raised: to define the pulse laser radiation influence value on different powder materials, as well as to define experimentally the thickness and width relations of a sintered powder layer from technological laser radiation parameters. At present there are various methods of rapid prototyping. Different physical processes and materials for making prototypes are employed: stereo-lithography - layered hardening of liquid monomers with UV-laser beam trough light influence: LOM method employs sheet materials cut with laser beams; FDM-method - layered covering of melted polymer fibers; selective laser sintering - SLS. At the last process prototypes are made from sintered powder materials under thermal effect of laser beam [1,2,10].

Original languageEnglish
Pages (from-to)654-659
Number of pages6
JournalMaterials Science Forum
Volume575-578 PART 1
Publication statusPublished - 2008
Externally publishedYes

Fingerprint

Powders
Laser pulses
sintering
Sintering
laser beams
Laser beams
Laser radiation
pulses
lasers
Frequency division multiplexing
prototypes
Rapid prototyping
rapid prototyping
Thermal effects
Lithography
Hardening
Polymers
ultraviolet lasers
troughs
Monomers

Keywords

  • Rapid prototyping
  • The powder materials
  • The process of selective laser sintering

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

Cite this

The research of a pulse laser powder materials' sintering process. / Saprykin, Alexander Alexandrovich; Nataly, Saprykina; Olesya, Krovina.

In: Materials Science Forum, Vol. 575-578 PART 1, 2008, p. 654-659.

Research output: Contribution to journalArticle

@article{1caecbcc5e93481fbf488a32096e303c,
title = "The research of a pulse laser powder materials' sintering process",
abstract = "During the research the following problem was raised: to define the pulse laser radiation influence value on different powder materials, as well as to define experimentally the thickness and width relations of a sintered powder layer from technological laser radiation parameters. At present there are various methods of rapid prototyping. Different physical processes and materials for making prototypes are employed: stereo-lithography - layered hardening of liquid monomers with UV-laser beam trough light influence: LOM method employs sheet materials cut with laser beams; FDM-method - layered covering of melted polymer fibers; selective laser sintering - SLS. At the last process prototypes are made from sintered powder materials under thermal effect of laser beam [1,2,10].",
keywords = "Rapid prototyping, The powder materials, The process of selective laser sintering",
author = "Saprykin, {Alexander Alexandrovich} and Saprykina Nataly and Krovina Olesya",
year = "2008",
language = "English",
volume = "575-578 PART 1",
pages = "654--659",
journal = "Materials Science Forum",
issn = "0255-5476",
publisher = "Trans Tech Publications",

}

TY - JOUR

T1 - The research of a pulse laser powder materials' sintering process

AU - Saprykin, Alexander Alexandrovich

AU - Nataly, Saprykina

AU - Olesya, Krovina

PY - 2008

Y1 - 2008

N2 - During the research the following problem was raised: to define the pulse laser radiation influence value on different powder materials, as well as to define experimentally the thickness and width relations of a sintered powder layer from technological laser radiation parameters. At present there are various methods of rapid prototyping. Different physical processes and materials for making prototypes are employed: stereo-lithography - layered hardening of liquid monomers with UV-laser beam trough light influence: LOM method employs sheet materials cut with laser beams; FDM-method - layered covering of melted polymer fibers; selective laser sintering - SLS. At the last process prototypes are made from sintered powder materials under thermal effect of laser beam [1,2,10].

AB - During the research the following problem was raised: to define the pulse laser radiation influence value on different powder materials, as well as to define experimentally the thickness and width relations of a sintered powder layer from technological laser radiation parameters. At present there are various methods of rapid prototyping. Different physical processes and materials for making prototypes are employed: stereo-lithography - layered hardening of liquid monomers with UV-laser beam trough light influence: LOM method employs sheet materials cut with laser beams; FDM-method - layered covering of melted polymer fibers; selective laser sintering - SLS. At the last process prototypes are made from sintered powder materials under thermal effect of laser beam [1,2,10].

KW - Rapid prototyping

KW - The powder materials

KW - The process of selective laser sintering

UR - http://www.scopus.com/inward/record.url?scp=47249111314&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=47249111314&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:47249111314

VL - 575-578 PART 1

SP - 654

EP - 659

JO - Materials Science Forum

JF - Materials Science Forum

SN - 0255-5476

ER -