The preparation of the Ti-Al alloys based on intermetallic phases

N. Kosova, V. Sachkov, I. Kurzina, A. Pichugina, A. Vladimirov, L. Kazantseva, Anna Sergeevna Sachkova

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Abstract

This article deals with a method of obtaining materials in the Ti-Al system. Research was carried out in accordance with the phase diagram of the system state. It was established, that both single-phase and multiphase systems, containing finely dispersed intermetallic compositions of phases Ti3Al, TiAl and TiAl3, are formed. Additionally, it was found that the pure finely dispersed (coherent-scattering region (CSR) up to 100 nm) intermetallic compound TiAl3 is formed at molar ratio of Ti:Al = 1:3. Experimentally proved the possibility of produce the complex composition of alloys and intermetallic compounds and products based on them.

Original languageEnglish
Title of host publicationIOP Conference Series: Materials Science and Engineering
PublisherInstitute of Physics Publishing
Volume112
Edition1
DOIs
Publication statusPublished - 18 Feb 2016
Event2nd International Symposium on Fundamental Aspects of Rare-Earth Elements Mining and Separation and Modern Materials Engineering, REES 2015 - Belokuriha, Altay, Russian Federation
Duration: 7 Sep 201515 Sep 2015

Other

Other2nd International Symposium on Fundamental Aspects of Rare-Earth Elements Mining and Separation and Modern Materials Engineering, REES 2015
CountryRussian Federation
CityBelokuriha, Altay
Period7.9.1515.9.15

Fingerprint

Intermetallics
Coherent scattering
Chemical analysis
Phase diagrams

ASJC Scopus subject areas

  • Engineering(all)
  • Materials Science(all)

Cite this

Kosova, N., Sachkov, V., Kurzina, I., Pichugina, A., Vladimirov, A., Kazantseva, L., & Sachkova, A. S. (2016). The preparation of the Ti-Al alloys based on intermetallic phases. In IOP Conference Series: Materials Science and Engineering (1 ed., Vol. 112). [012039] Institute of Physics Publishing. https://doi.org/10.1088/1757-899X/112/1/012039

The preparation of the Ti-Al alloys based on intermetallic phases. / Kosova, N.; Sachkov, V.; Kurzina, I.; Pichugina, A.; Vladimirov, A.; Kazantseva, L.; Sachkova, Anna Sergeevna.

IOP Conference Series: Materials Science and Engineering. Vol. 112 1. ed. Institute of Physics Publishing, 2016. 012039.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Kosova, N, Sachkov, V, Kurzina, I, Pichugina, A, Vladimirov, A, Kazantseva, L & Sachkova, AS 2016, The preparation of the Ti-Al alloys based on intermetallic phases. in IOP Conference Series: Materials Science and Engineering. 1 edn, vol. 112, 012039, Institute of Physics Publishing, 2nd International Symposium on Fundamental Aspects of Rare-Earth Elements Mining and Separation and Modern Materials Engineering, REES 2015, Belokuriha, Altay, Russian Federation, 7.9.15. https://doi.org/10.1088/1757-899X/112/1/012039
Kosova N, Sachkov V, Kurzina I, Pichugina A, Vladimirov A, Kazantseva L et al. The preparation of the Ti-Al alloys based on intermetallic phases. In IOP Conference Series: Materials Science and Engineering. 1 ed. Vol. 112. Institute of Physics Publishing. 2016. 012039 https://doi.org/10.1088/1757-899X/112/1/012039
Kosova, N. ; Sachkov, V. ; Kurzina, I. ; Pichugina, A. ; Vladimirov, A. ; Kazantseva, L. ; Sachkova, Anna Sergeevna. / The preparation of the Ti-Al alloys based on intermetallic phases. IOP Conference Series: Materials Science and Engineering. Vol. 112 1. ed. Institute of Physics Publishing, 2016.
@inproceedings{45ba890e9a7942aab32eb4a97aabde54,
title = "The preparation of the Ti-Al alloys based on intermetallic phases",
abstract = "This article deals with a method of obtaining materials in the Ti-Al system. Research was carried out in accordance with the phase diagram of the system state. It was established, that both single-phase and multiphase systems, containing finely dispersed intermetallic compositions of phases Ti3Al, TiAl and TiAl3, are formed. Additionally, it was found that the pure finely dispersed (coherent-scattering region (CSR) up to 100 nm) intermetallic compound TiAl3 is formed at molar ratio of Ti:Al = 1:3. Experimentally proved the possibility of produce the complex composition of alloys and intermetallic compounds and products based on them.",
author = "N. Kosova and V. Sachkov and I. Kurzina and A. Pichugina and A. Vladimirov and L. Kazantseva and Sachkova, {Anna Sergeevna}",
year = "2016",
month = "2",
day = "18",
doi = "10.1088/1757-899X/112/1/012039",
language = "English",
volume = "112",
booktitle = "IOP Conference Series: Materials Science and Engineering",
publisher = "Institute of Physics Publishing",
edition = "1",

}

TY - GEN

T1 - The preparation of the Ti-Al alloys based on intermetallic phases

AU - Kosova, N.

AU - Sachkov, V.

AU - Kurzina, I.

AU - Pichugina, A.

AU - Vladimirov, A.

AU - Kazantseva, L.

AU - Sachkova, Anna Sergeevna

PY - 2016/2/18

Y1 - 2016/2/18

N2 - This article deals with a method of obtaining materials in the Ti-Al system. Research was carried out in accordance with the phase diagram of the system state. It was established, that both single-phase and multiphase systems, containing finely dispersed intermetallic compositions of phases Ti3Al, TiAl and TiAl3, are formed. Additionally, it was found that the pure finely dispersed (coherent-scattering region (CSR) up to 100 nm) intermetallic compound TiAl3 is formed at molar ratio of Ti:Al = 1:3. Experimentally proved the possibility of produce the complex composition of alloys and intermetallic compounds and products based on them.

AB - This article deals with a method of obtaining materials in the Ti-Al system. Research was carried out in accordance with the phase diagram of the system state. It was established, that both single-phase and multiphase systems, containing finely dispersed intermetallic compositions of phases Ti3Al, TiAl and TiAl3, are formed. Additionally, it was found that the pure finely dispersed (coherent-scattering region (CSR) up to 100 nm) intermetallic compound TiAl3 is formed at molar ratio of Ti:Al = 1:3. Experimentally proved the possibility of produce the complex composition of alloys and intermetallic compounds and products based on them.

UR - http://www.scopus.com/inward/record.url?scp=84964573646&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84964573646&partnerID=8YFLogxK

U2 - 10.1088/1757-899X/112/1/012039

DO - 10.1088/1757-899X/112/1/012039

M3 - Conference contribution

VL - 112

BT - IOP Conference Series: Materials Science and Engineering

PB - Institute of Physics Publishing

ER -