The possibilities of dimensional electron-beam processing as applied to selective sintering of oxide ceramics in the forevacuum pressure range

I. Yu Bakeev, E. S. Dvilis, A. S. Klimov, E. M. Oks, A. A. Zenin

Research output: Contribution to journalConference articlepeer-review

Abstract

The paper presents the results of studies devoted to an effect of deviation and scanning parameters on the value of power density of a focused electron beam generated by a plasma electron source in the forevacuum pressure range. It is shown that the change in the beam power density does not exceed 20% with an angle of beam deviation within 20 degrees in the investigated pressure range of 6-8 pascals in air. The results of selective sintering of powder system of zirconia-alumina by an electron beam generated by a forevacuum plasma electron source are demonstrated.

Original languageEnglish
Article number012016
JournalJournal of Physics: Conference Series
Volume945
Issue number1
DOIs
Publication statusPublished - 31 Jan 2018
Event6th International Scientific School-Conference of Young Scientists on Modern Problems of Physics and Technologies, MPPT 2017 - Moscow, Russian Federation
Duration: 17 Apr 201721 Apr 2017

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Fingerprint Dive into the research topics of 'The possibilities of dimensional electron-beam processing as applied to selective sintering of oxide ceramics in the forevacuum pressure range'. Together they form a unique fingerprint.

Cite this