The porous structure characterization of products of non-equilibrium electrochemical oxidation of copper and cadmium

Alesya Dolinina, Valeriy Korobochkin, Natalya Usoltseva, Irina Frolova, Maksim Popov, Evgeniya Popova, Vladimir Kozik

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

The porous structure of copper-cadmium oxide system produced by electrochemical synthesis using alternating current in ammonium chloride solutions with concentrations of 3 and 25 wt% was studied. It was shown that the composition of electrolysis products is represented by oxides of copper (I) and (II), hydroxides of cadmium; it depends on the current density and the solution concentration. The products of joint electrochemical oxidation of copper and cadmium obtained in ammonium chloride solution with concentrations of 3 and 25 wt% and current densities of 1 and 3 A/cm2 are characterized by mesoporous structure.

Original languageEnglish
Title of host publicationHigh Technology
Subtitle of host publicationResearch and Applications 2016 - HTRA-2016
PublisherTrans Tech Publications Ltd
Pages292-296
Number of pages5
Volume743 KEM
ISBN (Print)9783035711356
DOIs
Publication statusPublished - 2017
Event5th International Science and Engineering Conference on High Technology: Research and Applications, HTRA 2016 - Tomsk, Russian Federation
Duration: 5 Dec 20167 Dec 2016

Publication series

NameKey Engineering Materials
Volume743 KEM
ISSN (Print)1013-9826

Conference

Conference5th International Science and Engineering Conference on High Technology: Research and Applications, HTRA 2016
CountryRussian Federation
CityTomsk
Period5.12.167.12.16

Fingerprint

Electrochemical oxidation
Cadmium
Copper
Ammonium Chloride
Current density
Hydroxides
Oxides
Electrolysis
Chemical analysis

Keywords

  • Alternating current
  • Cadmium oxide
  • Copper oxide
  • Electrolysis
  • Microstructure
  • Pore structure
  • Specific surface area
  • Specific volume

ASJC Scopus subject areas

  • Materials Science(all)
  • Mechanics of Materials
  • Mechanical Engineering

Cite this

Dolinina, A., Korobochkin, V., Usoltseva, N., Frolova, I., Popov, M., Popova, E., & Kozik, V. (2017). The porous structure characterization of products of non-equilibrium electrochemical oxidation of copper and cadmium. In High Technology: Research and Applications 2016 - HTRA-2016 (Vol. 743 KEM, pp. 292-296). (Key Engineering Materials; Vol. 743 KEM). Trans Tech Publications Ltd. https://doi.org/10.4028/www.scientific.net/KEM.743.292

The porous structure characterization of products of non-equilibrium electrochemical oxidation of copper and cadmium. / Dolinina, Alesya; Korobochkin, Valeriy; Usoltseva, Natalya; Frolova, Irina; Popov, Maksim; Popova, Evgeniya; Kozik, Vladimir.

High Technology: Research and Applications 2016 - HTRA-2016. Vol. 743 KEM Trans Tech Publications Ltd, 2017. p. 292-296 (Key Engineering Materials; Vol. 743 KEM).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Dolinina, A, Korobochkin, V, Usoltseva, N, Frolova, I, Popov, M, Popova, E & Kozik, V 2017, The porous structure characterization of products of non-equilibrium electrochemical oxidation of copper and cadmium. in High Technology: Research and Applications 2016 - HTRA-2016. vol. 743 KEM, Key Engineering Materials, vol. 743 KEM, Trans Tech Publications Ltd, pp. 292-296, 5th International Science and Engineering Conference on High Technology: Research and Applications, HTRA 2016, Tomsk, Russian Federation, 5.12.16. https://doi.org/10.4028/www.scientific.net/KEM.743.292
Dolinina A, Korobochkin V, Usoltseva N, Frolova I, Popov M, Popova E et al. The porous structure characterization of products of non-equilibrium electrochemical oxidation of copper and cadmium. In High Technology: Research and Applications 2016 - HTRA-2016. Vol. 743 KEM. Trans Tech Publications Ltd. 2017. p. 292-296. (Key Engineering Materials). https://doi.org/10.4028/www.scientific.net/KEM.743.292
Dolinina, Alesya ; Korobochkin, Valeriy ; Usoltseva, Natalya ; Frolova, Irina ; Popov, Maksim ; Popova, Evgeniya ; Kozik, Vladimir. / The porous structure characterization of products of non-equilibrium electrochemical oxidation of copper and cadmium. High Technology: Research and Applications 2016 - HTRA-2016. Vol. 743 KEM Trans Tech Publications Ltd, 2017. pp. 292-296 (Key Engineering Materials).
@inproceedings{7ff82d6902524bdd82e2655a3f4ff084,
title = "The porous structure characterization of products of non-equilibrium electrochemical oxidation of copper and cadmium",
abstract = "The porous structure of copper-cadmium oxide system produced by electrochemical synthesis using alternating current in ammonium chloride solutions with concentrations of 3 and 25 wt{\%} was studied. It was shown that the composition of electrolysis products is represented by oxides of copper (I) and (II), hydroxides of cadmium; it depends on the current density and the solution concentration. The products of joint electrochemical oxidation of copper and cadmium obtained in ammonium chloride solution with concentrations of 3 and 25 wt{\%} and current densities of 1 and 3 A/cm2 are characterized by mesoporous structure.",
keywords = "Alternating current, Cadmium oxide, Copper oxide, Electrolysis, Microstructure, Pore structure, Specific surface area, Specific volume",
author = "Alesya Dolinina and Valeriy Korobochkin and Natalya Usoltseva and Irina Frolova and Maksim Popov and Evgeniya Popova and Vladimir Kozik",
year = "2017",
doi = "10.4028/www.scientific.net/KEM.743.292",
language = "English",
isbn = "9783035711356",
volume = "743 KEM",
series = "Key Engineering Materials",
publisher = "Trans Tech Publications Ltd",
pages = "292--296",
booktitle = "High Technology",

}

TY - GEN

T1 - The porous structure characterization of products of non-equilibrium electrochemical oxidation of copper and cadmium

AU - Dolinina, Alesya

AU - Korobochkin, Valeriy

AU - Usoltseva, Natalya

AU - Frolova, Irina

AU - Popov, Maksim

AU - Popova, Evgeniya

AU - Kozik, Vladimir

PY - 2017

Y1 - 2017

N2 - The porous structure of copper-cadmium oxide system produced by electrochemical synthesis using alternating current in ammonium chloride solutions with concentrations of 3 and 25 wt% was studied. It was shown that the composition of electrolysis products is represented by oxides of copper (I) and (II), hydroxides of cadmium; it depends on the current density and the solution concentration. The products of joint electrochemical oxidation of copper and cadmium obtained in ammonium chloride solution with concentrations of 3 and 25 wt% and current densities of 1 and 3 A/cm2 are characterized by mesoporous structure.

AB - The porous structure of copper-cadmium oxide system produced by electrochemical synthesis using alternating current in ammonium chloride solutions with concentrations of 3 and 25 wt% was studied. It was shown that the composition of electrolysis products is represented by oxides of copper (I) and (II), hydroxides of cadmium; it depends on the current density and the solution concentration. The products of joint electrochemical oxidation of copper and cadmium obtained in ammonium chloride solution with concentrations of 3 and 25 wt% and current densities of 1 and 3 A/cm2 are characterized by mesoporous structure.

KW - Alternating current

KW - Cadmium oxide

KW - Copper oxide

KW - Electrolysis

KW - Microstructure

KW - Pore structure

KW - Specific surface area

KW - Specific volume

UR - http://www.scopus.com/inward/record.url?scp=85027051800&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85027051800&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/KEM.743.292

DO - 10.4028/www.scientific.net/KEM.743.292

M3 - Conference contribution

SN - 9783035711356

VL - 743 KEM

T3 - Key Engineering Materials

SP - 292

EP - 296

BT - High Technology

PB - Trans Tech Publications Ltd

ER -