The lazer powder materials' sintering process

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

At present there are various methods of rapid prototyping. Different physical processes and materials for making prototypes are employed: stereo-lithography - layered hardening of liquid monomers with UV-laser beam trough light influence: LOM method employs sheet materials cut with laser beams; FDIVI-method - layered covering of melted polymer fibers; selective laser sintering - SLS. At the last process prototypes are made from sintered powder materials under thermal effect of laser beam.

Original languageEnglish
Title of host publication2008 International Conference Modern Technique and Technologies, MTT 2008
Pages58-61
Number of pages4
DOIs
Publication statusPublished - 2008
Event2008 International Conference Modern Technique and Technologies, MTT 2008 - Tomsk, Russian Federation
Duration: 24 Mar 200828 Mar 2008

Conference

Conference2008 International Conference Modern Technique and Technologies, MTT 2008
CountryRussian Federation
CityTomsk
Period24.3.0828.3.08

Fingerprint

Laser beams
Sintering
Powders
Rapid prototyping
Thermal effects
Lithography
Hardening
Monomers
Fibers
Lasers
Liquids
Polymers

ASJC Scopus subject areas

  • Control and Systems Engineering
  • Electrical and Electronic Engineering

Cite this

Saprykin, A. A., & Saprykina, N. A. (2008). The lazer powder materials' sintering process. In 2008 International Conference Modern Technique and Technologies, MTT 2008 (pp. 58-61). [4897495] https://doi.org/10.1109/SPCMTT.2008.4897495

The lazer powder materials' sintering process. / Saprykin, Alexander Alexandrovich; Saprykina, N. A.

2008 International Conference Modern Technique and Technologies, MTT 2008. 2008. p. 58-61 4897495.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Saprykin, AA & Saprykina, NA 2008, The lazer powder materials' sintering process. in 2008 International Conference Modern Technique and Technologies, MTT 2008., 4897495, pp. 58-61, 2008 International Conference Modern Technique and Technologies, MTT 2008, Tomsk, Russian Federation, 24.3.08. https://doi.org/10.1109/SPCMTT.2008.4897495
Saprykin AA, Saprykina NA. The lazer powder materials' sintering process. In 2008 International Conference Modern Technique and Technologies, MTT 2008. 2008. p. 58-61. 4897495 https://doi.org/10.1109/SPCMTT.2008.4897495
Saprykin, Alexander Alexandrovich ; Saprykina, N. A. / The lazer powder materials' sintering process. 2008 International Conference Modern Technique and Technologies, MTT 2008. 2008. pp. 58-61
@inproceedings{dc190f0f666a41388ccad1c0a840ac37,
title = "The lazer powder materials' sintering process",
abstract = "At present there are various methods of rapid prototyping. Different physical processes and materials for making prototypes are employed: stereo-lithography - layered hardening of liquid monomers with UV-laser beam trough light influence: LOM method employs sheet materials cut with laser beams; FDIVI-method - layered covering of melted polymer fibers; selective laser sintering - SLS. At the last process prototypes are made from sintered powder materials under thermal effect of laser beam.",
author = "Saprykin, {Alexander Alexandrovich} and Saprykina, {N. A.}",
year = "2008",
doi = "10.1109/SPCMTT.2008.4897495",
language = "English",
isbn = "9781424416097",
pages = "58--61",
booktitle = "2008 International Conference Modern Technique and Technologies, MTT 2008",

}

TY - GEN

T1 - The lazer powder materials' sintering process

AU - Saprykin, Alexander Alexandrovich

AU - Saprykina, N. A.

PY - 2008

Y1 - 2008

N2 - At present there are various methods of rapid prototyping. Different physical processes and materials for making prototypes are employed: stereo-lithography - layered hardening of liquid monomers with UV-laser beam trough light influence: LOM method employs sheet materials cut with laser beams; FDIVI-method - layered covering of melted polymer fibers; selective laser sintering - SLS. At the last process prototypes are made from sintered powder materials under thermal effect of laser beam.

AB - At present there are various methods of rapid prototyping. Different physical processes and materials for making prototypes are employed: stereo-lithography - layered hardening of liquid monomers with UV-laser beam trough light influence: LOM method employs sheet materials cut with laser beams; FDIVI-method - layered covering of melted polymer fibers; selective laser sintering - SLS. At the last process prototypes are made from sintered powder materials under thermal effect of laser beam.

UR - http://www.scopus.com/inward/record.url?scp=77950895518&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=77950895518&partnerID=8YFLogxK

U2 - 10.1109/SPCMTT.2008.4897495

DO - 10.1109/SPCMTT.2008.4897495

M3 - Conference contribution

SN - 9781424416097

SP - 58

EP - 61

BT - 2008 International Conference Modern Technique and Technologies, MTT 2008

ER -