The influence of the design method for induction motor with stationary rotor on identification of its parameters

Research output: Chapter in Book/Report/Conference proceedingConference contribution

8 Citations (Scopus)

Abstract

The paper considers the methods of preparing the difference schemes required for dynamic identification of the parameters of a DC motor as an object of the electric drives with control system during idling start-up. A system of differential equations describing the separately excited DC motor is reduced to the system of difference equations for constructing the discrete model. The authors have used three methods: direct difference, bilinear transformation method and multipoint approximation for writing the difference equations system. The estimations of the parameters of the discrete model based on the linear algebraic equations system applied this way were obtained by the inverse matrix method. Comparing the estimates obtained the authors detected the influence of the methods of constructing the object discrete model on the error in the parameters estimations obtained.

Original languageEnglish
Title of host publication2015 International Siberian Conference on Control and Communications, SIBCON 2015 - Proceedings
EditorsOleg V. Stukach
PublisherInstitute of Electrical and Electronics Engineers Inc.
ISBN (Electronic)9781479971022
DOIs
Publication statusPublished - 1 Jul 2015
Event2015 International Siberian Conference on Control and Communications, SIBCON 2015 - Omsk, Russian Federation
Duration: 21 May 201523 May 2015

Publication series

Name2015 International Siberian Conference on Control and Communications, SIBCON 2015 - Proceedings

Conference

Conference2015 International Siberian Conference on Control and Communications, SIBCON 2015
CountryRussian Federation
CityOmsk
Period21.5.1523.5.15

Fingerprint

Induction motors
DC motors
Rotors
Difference equations
Electric drives
Linear equations
Parameter estimation
Differential equations
Control systems

Keywords

  • bilinear transformation method
  • direct difference
  • discrete model
  • dynamic identification
  • multipoint approximation
  • parameters estimations
  • regression equation

ASJC Scopus subject areas

  • Computer Networks and Communications
  • Control and Systems Engineering

Cite this

Bolovin, E. V., Glazyrin, A. S., & Brendakov, V. N. (2015). The influence of the design method for induction motor with stationary rotor on identification of its parameters. In O. V. Stukach (Ed.), 2015 International Siberian Conference on Control and Communications, SIBCON 2015 - Proceedings [7147006] (2015 International Siberian Conference on Control and Communications, SIBCON 2015 - Proceedings). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/SIBCON.2015.7147006

The influence of the design method for induction motor with stationary rotor on identification of its parameters. / Bolovin, Evgeniy V.; Glazyrin, Alexander S.; Brendakov, Vladimir N.

2015 International Siberian Conference on Control and Communications, SIBCON 2015 - Proceedings. ed. / Oleg V. Stukach. Institute of Electrical and Electronics Engineers Inc., 2015. 7147006 (2015 International Siberian Conference on Control and Communications, SIBCON 2015 - Proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bolovin, EV, Glazyrin, AS & Brendakov, VN 2015, The influence of the design method for induction motor with stationary rotor on identification of its parameters. in OV Stukach (ed.), 2015 International Siberian Conference on Control and Communications, SIBCON 2015 - Proceedings., 7147006, 2015 International Siberian Conference on Control and Communications, SIBCON 2015 - Proceedings, Institute of Electrical and Electronics Engineers Inc., 2015 International Siberian Conference on Control and Communications, SIBCON 2015, Omsk, Russian Federation, 21.5.15. https://doi.org/10.1109/SIBCON.2015.7147006
Bolovin EV, Glazyrin AS, Brendakov VN. The influence of the design method for induction motor with stationary rotor on identification of its parameters. In Stukach OV, editor, 2015 International Siberian Conference on Control and Communications, SIBCON 2015 - Proceedings. Institute of Electrical and Electronics Engineers Inc. 2015. 7147006. (2015 International Siberian Conference on Control and Communications, SIBCON 2015 - Proceedings). https://doi.org/10.1109/SIBCON.2015.7147006
Bolovin, Evgeniy V. ; Glazyrin, Alexander S. ; Brendakov, Vladimir N. / The influence of the design method for induction motor with stationary rotor on identification of its parameters. 2015 International Siberian Conference on Control and Communications, SIBCON 2015 - Proceedings. editor / Oleg V. Stukach. Institute of Electrical and Electronics Engineers Inc., 2015. (2015 International Siberian Conference on Control and Communications, SIBCON 2015 - Proceedings).
@inproceedings{e33e7e15191f4e70a3c5d3390e51b1db,
title = "The influence of the design method for induction motor with stationary rotor on identification of its parameters",
abstract = "The paper considers the methods of preparing the difference schemes required for dynamic identification of the parameters of a DC motor as an object of the electric drives with control system during idling start-up. A system of differential equations describing the separately excited DC motor is reduced to the system of difference equations for constructing the discrete model. The authors have used three methods: direct difference, bilinear transformation method and multipoint approximation for writing the difference equations system. The estimations of the parameters of the discrete model based on the linear algebraic equations system applied this way were obtained by the inverse matrix method. Comparing the estimates obtained the authors detected the influence of the methods of constructing the object discrete model on the error in the parameters estimations obtained.",
keywords = "bilinear transformation method, direct difference, discrete model, dynamic identification, multipoint approximation, parameters estimations, regression equation",
author = "Bolovin, {Evgeniy V.} and Glazyrin, {Alexander S.} and Brendakov, {Vladimir N.}",
year = "2015",
month = "7",
day = "1",
doi = "10.1109/SIBCON.2015.7147006",
language = "English",
series = "2015 International Siberian Conference on Control and Communications, SIBCON 2015 - Proceedings",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
editor = "Stukach, {Oleg V.}",
booktitle = "2015 International Siberian Conference on Control and Communications, SIBCON 2015 - Proceedings",
address = "United States",

}

TY - GEN

T1 - The influence of the design method for induction motor with stationary rotor on identification of its parameters

AU - Bolovin, Evgeniy V.

AU - Glazyrin, Alexander S.

AU - Brendakov, Vladimir N.

PY - 2015/7/1

Y1 - 2015/7/1

N2 - The paper considers the methods of preparing the difference schemes required for dynamic identification of the parameters of a DC motor as an object of the electric drives with control system during idling start-up. A system of differential equations describing the separately excited DC motor is reduced to the system of difference equations for constructing the discrete model. The authors have used three methods: direct difference, bilinear transformation method and multipoint approximation for writing the difference equations system. The estimations of the parameters of the discrete model based on the linear algebraic equations system applied this way were obtained by the inverse matrix method. Comparing the estimates obtained the authors detected the influence of the methods of constructing the object discrete model on the error in the parameters estimations obtained.

AB - The paper considers the methods of preparing the difference schemes required for dynamic identification of the parameters of a DC motor as an object of the electric drives with control system during idling start-up. A system of differential equations describing the separately excited DC motor is reduced to the system of difference equations for constructing the discrete model. The authors have used three methods: direct difference, bilinear transformation method and multipoint approximation for writing the difference equations system. The estimations of the parameters of the discrete model based on the linear algebraic equations system applied this way were obtained by the inverse matrix method. Comparing the estimates obtained the authors detected the influence of the methods of constructing the object discrete model on the error in the parameters estimations obtained.

KW - bilinear transformation method

KW - direct difference

KW - discrete model

KW - dynamic identification

KW - multipoint approximation

KW - parameters estimations

KW - regression equation

UR - http://www.scopus.com/inward/record.url?scp=84941089305&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84941089305&partnerID=8YFLogxK

U2 - 10.1109/SIBCON.2015.7147006

DO - 10.1109/SIBCON.2015.7147006

M3 - Conference contribution

AN - SCOPUS:84941089305

T3 - 2015 International Siberian Conference on Control and Communications, SIBCON 2015 - Proceedings

BT - 2015 International Siberian Conference on Control and Communications, SIBCON 2015 - Proceedings

A2 - Stukach, Oleg V.

PB - Institute of Electrical and Electronics Engineers Inc.

ER -