The influence of samples production parameters on the structure and mechanical properties of wrought aluminum alloys of the Al-Cu-Mg system

A. V. Chumaevskii, T. A. Kalashnikova, L. L. Zhukov, A. V. Gusarova, A. N. Ivanov, V. A. Beloborodov, E. A. Kolubaev, V. E. Rubtsov, A. G. Tyurin, V. A. Bakshaev, Y. V. Nikitin

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

In this paper, regularities of the friction stir welding process parameters influence on mechanical properties of welded joints of different thicknesses are investigated. Joints were produced using the same type of tools with a screw-shaped pin. The tests show different dependencies of the joint mechanical behavior on the welding parameters. 2-mm-thick samples are characterized by high values of the ultimate tensile strength and a small variation of those when changing parameters. 10-mm-thick samples are characterized by a lower ultimate tensile strength and a greater variation at changing process parameters.

Original languageEnglish
Title of host publicationProceedings of the International Conference on Physical Mesomechanics. Materials with Multilevel Hierarchical Structure and Intelligent Manufacturing Technology
EditorsVictor E. Panin, Vasily M. Fomin
PublisherAmerican Institute of Physics Inc.
ISBN (Electronic)9780735440463
DOIs
Publication statusPublished - 14 Dec 2020
Externally publishedYes
EventInternational Conference on Physical Mesomechanics. Materials with Multilevel Hierarchical Structure and Intelligent Manufacturing Technology 2020 - Tomsk, Russian Federation
Duration: 5 Oct 20209 Oct 2020

Publication series

NameAIP Conference Proceedings
Volume2310
ISSN (Print)0094-243X
ISSN (Electronic)1551-7616

Conference

ConferenceInternational Conference on Physical Mesomechanics. Materials with Multilevel Hierarchical Structure and Intelligent Manufacturing Technology 2020
CountryRussian Federation
CityTomsk
Period5.10.209.10.20

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Fingerprint Dive into the research topics of 'The influence of samples production parameters on the structure and mechanical properties of wrought aluminum alloys of the Al-Cu-Mg system'. Together they form a unique fingerprint.

Cite this