The influence of process parameters on the physicomechanical characteristics of polycarbonate

Research output: Contribution to journalArticle

Abstract

The influence of the conditions applied in the processing of polycarbonate (PC) on the physicomechanical characteristics of specimens is shown. It is established that the most sensitive characteristics, depending on the direction of melt flow, the holding time in the melt, and the cooling rate of the polycarbonate, are the elongation at break and the impact strength.

Original languageEnglish
Pages (from-to)51-53
Number of pages3
JournalInternational Polymer Science and Technology
Volume41
Issue number2
Publication statusPublished - 2014

Fingerprint

polycarbonate
Polycarbonates
Impact strength
Elongation
Cooling
Processing

ASJC Scopus subject areas

  • Polymers and Plastics

Cite this

@article{e82218a674f347abadf3c4edfe7afc4a,
title = "The influence of process parameters on the physicomechanical characteristics of polycarbonate",
abstract = "The influence of the conditions applied in the processing of polycarbonate (PC) on the physicomechanical characteristics of specimens is shown. It is established that the most sensitive characteristics, depending on the direction of melt flow, the holding time in the melt, and the cooling rate of the polycarbonate, are the elongation at break and the impact strength.",
author = "Lebedev, {S. M.} and Gefle, {O. S.}",
year = "2014",
language = "English",
volume = "41",
pages = "51--53",
journal = "International Polymer Science and Technology",
issn = "0307-174X",
publisher = "RAPRA Technology Ltd.",
number = "2",

}

TY - JOUR

T1 - The influence of process parameters on the physicomechanical characteristics of polycarbonate

AU - Lebedev, S. M.

AU - Gefle, O. S.

PY - 2014

Y1 - 2014

N2 - The influence of the conditions applied in the processing of polycarbonate (PC) on the physicomechanical characteristics of specimens is shown. It is established that the most sensitive characteristics, depending on the direction of melt flow, the holding time in the melt, and the cooling rate of the polycarbonate, are the elongation at break and the impact strength.

AB - The influence of the conditions applied in the processing of polycarbonate (PC) on the physicomechanical characteristics of specimens is shown. It is established that the most sensitive characteristics, depending on the direction of melt flow, the holding time in the melt, and the cooling rate of the polycarbonate, are the elongation at break and the impact strength.

UR - http://www.scopus.com/inward/record.url?scp=84904416465&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84904416465&partnerID=8YFLogxK

M3 - Article

VL - 41

SP - 51

EP - 53

JO - International Polymer Science and Technology

JF - International Polymer Science and Technology

SN - 0307-174X

IS - 2

ER -