The influence of non-vacuum electron-beam facing on the structure of Ti-Ta layers formed on the surface of VT1-0 alloy

V. V. Samoylenko, O. G. Lenivtseva, I. A. Polyakov, I. S. Laptev, N. V. Martyushev

Research output: Contribution to journalConference article

14 Citations (Scopus)

Abstract

The influence of electron-beam facing modes on the structure of Ti-Ta layers formed on the surface of commercially pure titanium VT1-0 has been studied in the paper. The mode of the electron-beam treatment of alloying powder mixture, by which there were no defects in the pad, has been identified. The methods of optical microscopy and scanning electron microscopy have shown that in pads there is dendritic segregation typical for the process of initial crystallisation. At greater magnifications it is possible to observe a structure of the laminar type. The X-ray phase analysis of titanium-tantalum layers justifies the presence of two phases: a hexagonal α'-phase and a cubic (β-phase of titanium.

Original languageEnglish
Article number012117
JournalIOP Conference Series: Materials Science and Engineering
Volume124
Issue number1
DOIs
Publication statusPublished - 2 Jun 2016
EventInternational Conference on Mechanical Engineering, Automation and Control Systems 2015, MEACS 2015 - Tomsk, Russian Federation
Duration: 1 Dec 20154 Dec 2015

Fingerprint

Titanium
Electron beams
Tantalum
Crystallization
Alloying
Powders
Optical microscopy
Scanning
X rays
Defects
Scanning electron microscopy

ASJC Scopus subject areas

  • Materials Science(all)
  • Engineering(all)

Cite this

The influence of non-vacuum electron-beam facing on the structure of Ti-Ta layers formed on the surface of VT1-0 alloy. / Samoylenko, V. V.; Lenivtseva, O. G.; Polyakov, I. A.; Laptev, I. S.; Martyushev, N. V.

In: IOP Conference Series: Materials Science and Engineering, Vol. 124, No. 1, 012117, 02.06.2016.

Research output: Contribution to journalConference article

@article{d5412662db13487bbae578591d4c0259,
title = "The influence of non-vacuum electron-beam facing on the structure of Ti-Ta layers formed on the surface of VT1-0 alloy",
abstract = "The influence of electron-beam facing modes on the structure of Ti-Ta layers formed on the surface of commercially pure titanium VT1-0 has been studied in the paper. The mode of the electron-beam treatment of alloying powder mixture, by which there were no defects in the pad, has been identified. The methods of optical microscopy and scanning electron microscopy have shown that in pads there is dendritic segregation typical for the process of initial crystallisation. At greater magnifications it is possible to observe a structure of the laminar type. The X-ray phase analysis of titanium-tantalum layers justifies the presence of two phases: a hexagonal α'-phase and a cubic (β-phase of titanium.",
author = "Samoylenko, {V. V.} and Lenivtseva, {O. G.} and Polyakov, {I. A.} and Laptev, {I. S.} and Martyushev, {N. V.}",
year = "2016",
month = "6",
day = "2",
doi = "10.1088/1757-899X/124/1/012117",
language = "English",
volume = "124",
journal = "IOP Conference Series: Materials Science and Engineering",
issn = "1757-8981",
publisher = "IOP Publishing Ltd.",
number = "1",

}

TY - JOUR

T1 - The influence of non-vacuum electron-beam facing on the structure of Ti-Ta layers formed on the surface of VT1-0 alloy

AU - Samoylenko, V. V.

AU - Lenivtseva, O. G.

AU - Polyakov, I. A.

AU - Laptev, I. S.

AU - Martyushev, N. V.

PY - 2016/6/2

Y1 - 2016/6/2

N2 - The influence of electron-beam facing modes on the structure of Ti-Ta layers formed on the surface of commercially pure titanium VT1-0 has been studied in the paper. The mode of the electron-beam treatment of alloying powder mixture, by which there were no defects in the pad, has been identified. The methods of optical microscopy and scanning electron microscopy have shown that in pads there is dendritic segregation typical for the process of initial crystallisation. At greater magnifications it is possible to observe a structure of the laminar type. The X-ray phase analysis of titanium-tantalum layers justifies the presence of two phases: a hexagonal α'-phase and a cubic (β-phase of titanium.

AB - The influence of electron-beam facing modes on the structure of Ti-Ta layers formed on the surface of commercially pure titanium VT1-0 has been studied in the paper. The mode of the electron-beam treatment of alloying powder mixture, by which there were no defects in the pad, has been identified. The methods of optical microscopy and scanning electron microscopy have shown that in pads there is dendritic segregation typical for the process of initial crystallisation. At greater magnifications it is possible to observe a structure of the laminar type. The X-ray phase analysis of titanium-tantalum layers justifies the presence of two phases: a hexagonal α'-phase and a cubic (β-phase of titanium.

UR - http://www.scopus.com/inward/record.url?scp=84975740612&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84975740612&partnerID=8YFLogxK

U2 - 10.1088/1757-899X/124/1/012117

DO - 10.1088/1757-899X/124/1/012117

M3 - Conference article

VL - 124

JO - IOP Conference Series: Materials Science and Engineering

JF - IOP Conference Series: Materials Science and Engineering

SN - 1757-8981

IS - 1

M1 - 012117

ER -