Abstract
This paper aims to characterize two dental bridges made from Co-Cr alloy, the first one obtained by the conventional method (casting) and the second one by Selective Laser Sintering technique (SLS). The elemental composition, microstructure, hardness and corrosion behavior in artificial saliva were investigated, allowing a parallel analysis of this two samples obtained with the two methods mentioned above.
| Original language | English |
|---|---|
| Title of host publication | BiomMedD V |
| Pages | 163-168 |
| Number of pages | 6 |
| DOIs | |
| Publication status | Published - 1 Jan 2014 |
| Externally published | Yes |
| Event | 5th International Conference on Biomaterials, Tissue Engineering and Medical Devices, BiomMedD 2012 - Constanta, Romania Duration: 29 Aug 2012 → 1 Sep 2012 |
Publication series
| Name | Key Engineering Materials |
|---|---|
| Volume | 583 |
| ISSN (Print) | 1013-9826 |
Conference
| Conference | 5th International Conference on Biomaterials, Tissue Engineering and Medical Devices, BiomMedD 2012 |
|---|---|
| Country | Romania |
| City | Constanta |
| Period | 29.8.12 → 1.9.12 |
Fingerprint
Keywords
- Co-Cr alloy
- Dental bridges
- Selective laser sintering
ASJC Scopus subject areas
- Materials Science(all)
- Mechanics of Materials
- Mechanical Engineering
Cite this
The influence of classical and modern manufacturing technologies on the properties of metal dental bridges. / Cotruţ, Cosmin Mihai; Ciucǎ, Sorin; Miculescu, Florin; Antoniac, Iulian; Târcolea, Mihai; Vrânceanu, Diana Maria.
BiomMedD V. 2014. p. 163-168 (Key Engineering Materials; Vol. 583).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
}
TY - GEN
T1 - The influence of classical and modern manufacturing technologies on the properties of metal dental bridges
AU - Cotruţ, Cosmin Mihai
AU - Ciucǎ, Sorin
AU - Miculescu, Florin
AU - Antoniac, Iulian
AU - Târcolea, Mihai
AU - Vrânceanu, Diana Maria
PY - 2014/1/1
Y1 - 2014/1/1
N2 - This paper aims to characterize two dental bridges made from Co-Cr alloy, the first one obtained by the conventional method (casting) and the second one by Selective Laser Sintering technique (SLS). The elemental composition, microstructure, hardness and corrosion behavior in artificial saliva were investigated, allowing a parallel analysis of this two samples obtained with the two methods mentioned above.
AB - This paper aims to characterize two dental bridges made from Co-Cr alloy, the first one obtained by the conventional method (casting) and the second one by Selective Laser Sintering technique (SLS). The elemental composition, microstructure, hardness and corrosion behavior in artificial saliva were investigated, allowing a parallel analysis of this two samples obtained with the two methods mentioned above.
KW - Co-Cr alloy
KW - Dental bridges
KW - Selective laser sintering
UR - http://www.scopus.com/inward/record.url?scp=84885927749&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=84885927749&partnerID=8YFLogxK
U2 - 10.4028/www.scientific.net/KEM.583.163
DO - 10.4028/www.scientific.net/KEM.583.163
M3 - Conference contribution
SN - 9783037858660
T3 - Key Engineering Materials
SP - 163
EP - 168
BT - BiomMedD V
ER -