The effect of synthesis conditions of emulsifier on the properties of oil-based drilling muds

V. A. Yanovsky, A. D. Fenzel, M. O. Andropov, R. S. Fakhrislamova, A. S. Zakharov, R. A. Churkin, K. M. Minaev

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

The present work is dedicated to the study of the effect of emulsifier synthesis parameters on the stability, rheological properties and fluid loss of oil-based drilling muds. The duration and temperature mode of direct amidation of fatty acids by diethanolamine are shown to have a marked impact on the composition of the products obtained, and, hence, the properties of drilling muds stabilized by these products. The dependencies of electrical stability of drilling muds on the time of emulsifier synthesis proceed through maximum point, while similar dependencies of structural-mechanical properties proceed through minimum points. Herein, for each synthesis temperature, the value of maximal electrical stability corresponds to position of minimum points of yield point and gel strength. An increase of the temperature of synthesis promotes increasing of electrical stability of drilling mud and reduction of its structural-mechanical (shear stress) properties. The ranges of optimal process duration are determined for three temperatures, i.e. 150 °C - 2-5 h, 170 °C - 1-2 h, and 190 °C - 30-60 min. Plastic viscosity, thixotropic properties and fluid loss of drilling mud are shown to be independent on the emulsifier synthesis conditions. It is also concluded that the degree of conversion of fatty acids and the amount of water formed during the synthesis cannot be considered the criteria for completion of the process.

Original languageEnglish
Pages (from-to)93-97
Number of pages5
JournalNeftyanoe khozyaystvo - Oil Industry
Issue number6
DOIs
Publication statusPublished - 1 Jun 2018

Keywords

  • Emulsifier
  • Fatty acid diethanolamides
  • Oil-based mud
  • Oil-in-water emulsion mud
  • Surfactant

ASJC Scopus subject areas

  • Fuel Technology
  • Energy Engineering and Power Technology

Fingerprint Dive into the research topics of 'The effect of synthesis conditions of emulsifier on the properties of oil-based drilling muds'. Together they form a unique fingerprint.

  • Cite this