The comparison of model compaction method to make uniformly dense ceramic bodies

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

The "collector" method of uniaxial dry compacting homogeneously dense powdered bodies of complex shape without macroscopic defects has been developed. It was based on the self-alignment of uniform density regions within a green compact by design of special mold to reduce die-wall friction effects. An equation was proposed that determined the density differential throughout the height of a green compact, which depended on geometrical parameters, and required the controlled movement of die parts. The technique of pressing with the collector method has been developed and patented by TPU. Based on the principles of the collector method a compaction mold of spiral type was modeled for compaction of cylindrical compacts with two alternating, oppositely-moving parts of the passive shaping surface with sliders, twisted at an angle of 36 degrees. The process of powder compaction was simulated by finite element method. The simulation results of the deformation process in the compacts showed that the density of each layer distributed irregularly with the curvature of isosurfaces in the direction of movement of the punch. The results of comparative simulation showed that the statistical dispersion of local values of the deformation of the green compacts made by collector method with the mold of spiral type is reduced to 48% when compared with conventional static compaction and reduced to 5% when compared with collector compaction using the mold of non-spiral type. This method decreases the density gradients. It can be applied to manufacture ceramic articles from nanopowders like impellers and plates with longitudinal holes.

Original languageEnglish
Title of host publicationProceedings - 2012 7th International Forum on Strategic Technology, IFOST 2012
DOIs
Publication statusPublished - 2012
Event2012 7th International Forum on Strategic Technology, IFOST 2012 - Tomsk, Russian Federation
Duration: 18 Sep 201221 Sep 2012

Other

Other2012 7th International Forum on Strategic Technology, IFOST 2012
CountryRussian Federation
CityTomsk
Period18.9.1221.9.12

Fingerprint

Compaction
Impellers
Friction
Finite element method
Powders
Defects
Simulation

Keywords

  • ceramics
  • collector pressing
  • powder compaction
  • uniform density distribution

ASJC Scopus subject areas

  • Management of Technology and Innovation

Cite this

Oleg, K., Edgar, D., Vitaly, S., & Prakorb, C. (2012). The comparison of model compaction method to make uniformly dense ceramic bodies. In Proceedings - 2012 7th International Forum on Strategic Technology, IFOST 2012 [6357599] https://doi.org/10.1109/IFOST.2012.6357599

The comparison of model compaction method to make uniformly dense ceramic bodies. / Oleg, Khasanov; Edgar, Dvilis; Vitaly, Sokolov; Prakorb, Chartpuk.

Proceedings - 2012 7th International Forum on Strategic Technology, IFOST 2012. 2012. 6357599.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Oleg, K, Edgar, D, Vitaly, S & Prakorb, C 2012, The comparison of model compaction method to make uniformly dense ceramic bodies. in Proceedings - 2012 7th International Forum on Strategic Technology, IFOST 2012., 6357599, 2012 7th International Forum on Strategic Technology, IFOST 2012, Tomsk, Russian Federation, 18.9.12. https://doi.org/10.1109/IFOST.2012.6357599
Oleg K, Edgar D, Vitaly S, Prakorb C. The comparison of model compaction method to make uniformly dense ceramic bodies. In Proceedings - 2012 7th International Forum on Strategic Technology, IFOST 2012. 2012. 6357599 https://doi.org/10.1109/IFOST.2012.6357599
Oleg, Khasanov ; Edgar, Dvilis ; Vitaly, Sokolov ; Prakorb, Chartpuk. / The comparison of model compaction method to make uniformly dense ceramic bodies. Proceedings - 2012 7th International Forum on Strategic Technology, IFOST 2012. 2012.
@inproceedings{e71a82445cbb439ab8c07d545c14bf41,
title = "The comparison of model compaction method to make uniformly dense ceramic bodies",
abstract = "The {"}collector{"} method of uniaxial dry compacting homogeneously dense powdered bodies of complex shape without macroscopic defects has been developed. It was based on the self-alignment of uniform density regions within a green compact by design of special mold to reduce die-wall friction effects. An equation was proposed that determined the density differential throughout the height of a green compact, which depended on geometrical parameters, and required the controlled movement of die parts. The technique of pressing with the collector method has been developed and patented by TPU. Based on the principles of the collector method a compaction mold of spiral type was modeled for compaction of cylindrical compacts with two alternating, oppositely-moving parts of the passive shaping surface with sliders, twisted at an angle of 36 degrees. The process of powder compaction was simulated by finite element method. The simulation results of the deformation process in the compacts showed that the density of each layer distributed irregularly with the curvature of isosurfaces in the direction of movement of the punch. The results of comparative simulation showed that the statistical dispersion of local values of the deformation of the green compacts made by collector method with the mold of spiral type is reduced to 48{\%} when compared with conventional static compaction and reduced to 5{\%} when compared with collector compaction using the mold of non-spiral type. This method decreases the density gradients. It can be applied to manufacture ceramic articles from nanopowders like impellers and plates with longitudinal holes.",
keywords = "ceramics, collector pressing, powder compaction, uniform density distribution",
author = "Khasanov Oleg and Dvilis Edgar and Sokolov Vitaly and Chartpuk Prakorb",
year = "2012",
doi = "10.1109/IFOST.2012.6357599",
language = "English",
isbn = "9781467317702",
booktitle = "Proceedings - 2012 7th International Forum on Strategic Technology, IFOST 2012",

}

TY - GEN

T1 - The comparison of model compaction method to make uniformly dense ceramic bodies

AU - Oleg, Khasanov

AU - Edgar, Dvilis

AU - Vitaly, Sokolov

AU - Prakorb, Chartpuk

PY - 2012

Y1 - 2012

N2 - The "collector" method of uniaxial dry compacting homogeneously dense powdered bodies of complex shape without macroscopic defects has been developed. It was based on the self-alignment of uniform density regions within a green compact by design of special mold to reduce die-wall friction effects. An equation was proposed that determined the density differential throughout the height of a green compact, which depended on geometrical parameters, and required the controlled movement of die parts. The technique of pressing with the collector method has been developed and patented by TPU. Based on the principles of the collector method a compaction mold of spiral type was modeled for compaction of cylindrical compacts with two alternating, oppositely-moving parts of the passive shaping surface with sliders, twisted at an angle of 36 degrees. The process of powder compaction was simulated by finite element method. The simulation results of the deformation process in the compacts showed that the density of each layer distributed irregularly with the curvature of isosurfaces in the direction of movement of the punch. The results of comparative simulation showed that the statistical dispersion of local values of the deformation of the green compacts made by collector method with the mold of spiral type is reduced to 48% when compared with conventional static compaction and reduced to 5% when compared with collector compaction using the mold of non-spiral type. This method decreases the density gradients. It can be applied to manufacture ceramic articles from nanopowders like impellers and plates with longitudinal holes.

AB - The "collector" method of uniaxial dry compacting homogeneously dense powdered bodies of complex shape without macroscopic defects has been developed. It was based on the self-alignment of uniform density regions within a green compact by design of special mold to reduce die-wall friction effects. An equation was proposed that determined the density differential throughout the height of a green compact, which depended on geometrical parameters, and required the controlled movement of die parts. The technique of pressing with the collector method has been developed and patented by TPU. Based on the principles of the collector method a compaction mold of spiral type was modeled for compaction of cylindrical compacts with two alternating, oppositely-moving parts of the passive shaping surface with sliders, twisted at an angle of 36 degrees. The process of powder compaction was simulated by finite element method. The simulation results of the deformation process in the compacts showed that the density of each layer distributed irregularly with the curvature of isosurfaces in the direction of movement of the punch. The results of comparative simulation showed that the statistical dispersion of local values of the deformation of the green compacts made by collector method with the mold of spiral type is reduced to 48% when compared with conventional static compaction and reduced to 5% when compared with collector compaction using the mold of non-spiral type. This method decreases the density gradients. It can be applied to manufacture ceramic articles from nanopowders like impellers and plates with longitudinal holes.

KW - ceramics

KW - collector pressing

KW - powder compaction

KW - uniform density distribution

UR - http://www.scopus.com/inward/record.url?scp=84871835770&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84871835770&partnerID=8YFLogxK

U2 - 10.1109/IFOST.2012.6357599

DO - 10.1109/IFOST.2012.6357599

M3 - Conference contribution

SN - 9781467317702

BT - Proceedings - 2012 7th International Forum on Strategic Technology, IFOST 2012

ER -