Textural characteristics of products obtained by electrochemical oxidation of copper and cadmium using alternating current

Alesya Sergeevna Dolinina, V. V. Korobochkin, Natalia Vasilievna Usoltseva, E. A. Sudarev, A. V. Bikbaeva, M. V. Popov

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

The porous structures of nanoparticles of copper and cadmium prepared by alternating current electrochemical synthesis in solutions of acetate of sodium, chlorides of ammonium and sodium were studied. It is established that at current density of 1A/cm2, NaCl concentration of 3 wt. % with the highest specific surface area (8.2 m2/g), maximum pore volume (0.029 cm3/g) are formed, the largest volume of the particles is characteristic of the nominal pore diameter 62 nm. The values of specific surface area and total pore volume with increase the temperature of calcinations decrease, and the pores are slightly enlarged in diameter. Thus, the obtained data allow predicting operating parameters of the electrolysis to obtain copper - cadmium oxide system of a predetermined porous structure.

Original languageEnglish
Title of host publicationAdvanced Materials for Technical and Medical Purpose
PublisherTrans Tech Publications Ltd
Pages112-116
Number of pages5
Volume712
ISBN (Print)9783035710649
DOIs
Publication statusPublished - 2016
EventWorkshop on Advanced Materials for Technical and Medical Purpose, AMTMP-2016 - Tomsk, Russian Federation
Duration: 15 Feb 201617 Feb 2016

Publication series

NameKey Engineering Materials
Volume712
ISSN (Print)10139826

Conference

ConferenceWorkshop on Advanced Materials for Technical and Medical Purpose, AMTMP-2016
CountryRussian Federation
CityTomsk
Period15.2.1617.2.16

Fingerprint

Electrochemical oxidation
Cadmium
Specific surface area
Copper
Sodium chloride
Ammonium Compounds
Electrolysis
Sodium Chloride
Calcination
Current density
Sodium
Nanoparticles
Oxides
Temperature
cadmium oxide

Keywords

  • Alternating current
  • Copper-cadmium oxide
  • Dispersity
  • Electrolysis
  • Mesopores
  • Nanoparticles
  • Specific surface area

ASJC Scopus subject areas

  • Materials Science(all)
  • Mechanics of Materials
  • Mechanical Engineering

Cite this

Dolinina, A. S., Korobochkin, V. V., Usoltseva, N. V., Sudarev, E. A., Bikbaeva, A. V., & Popov, M. V. (2016). Textural characteristics of products obtained by electrochemical oxidation of copper and cadmium using alternating current. In Advanced Materials for Technical and Medical Purpose (Vol. 712, pp. 112-116). (Key Engineering Materials; Vol. 712). Trans Tech Publications Ltd. https://doi.org/10.4028/www.scientific.net/KEM.712.112

Textural characteristics of products obtained by electrochemical oxidation of copper and cadmium using alternating current. / Dolinina, Alesya Sergeevna; Korobochkin, V. V.; Usoltseva, Natalia Vasilievna; Sudarev, E. A.; Bikbaeva, A. V.; Popov, M. V.

Advanced Materials for Technical and Medical Purpose. Vol. 712 Trans Tech Publications Ltd, 2016. p. 112-116 (Key Engineering Materials; Vol. 712).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Dolinina, AS, Korobochkin, VV, Usoltseva, NV, Sudarev, EA, Bikbaeva, AV & Popov, MV 2016, Textural characteristics of products obtained by electrochemical oxidation of copper and cadmium using alternating current. in Advanced Materials for Technical and Medical Purpose. vol. 712, Key Engineering Materials, vol. 712, Trans Tech Publications Ltd, pp. 112-116, Workshop on Advanced Materials for Technical and Medical Purpose, AMTMP-2016, Tomsk, Russian Federation, 15.2.16. https://doi.org/10.4028/www.scientific.net/KEM.712.112
Dolinina AS, Korobochkin VV, Usoltseva NV, Sudarev EA, Bikbaeva AV, Popov MV. Textural characteristics of products obtained by electrochemical oxidation of copper and cadmium using alternating current. In Advanced Materials for Technical and Medical Purpose. Vol. 712. Trans Tech Publications Ltd. 2016. p. 112-116. (Key Engineering Materials). https://doi.org/10.4028/www.scientific.net/KEM.712.112
Dolinina, Alesya Sergeevna ; Korobochkin, V. V. ; Usoltseva, Natalia Vasilievna ; Sudarev, E. A. ; Bikbaeva, A. V. ; Popov, M. V. / Textural characteristics of products obtained by electrochemical oxidation of copper and cadmium using alternating current. Advanced Materials for Technical and Medical Purpose. Vol. 712 Trans Tech Publications Ltd, 2016. pp. 112-116 (Key Engineering Materials).
@inproceedings{9a1db3793de347248d7fa24c2b3198c9,
title = "Textural characteristics of products obtained by electrochemical oxidation of copper and cadmium using alternating current",
abstract = "The porous structures of nanoparticles of copper and cadmium prepared by alternating current electrochemical synthesis in solutions of acetate of sodium, chlorides of ammonium and sodium were studied. It is established that at current density of 1A/cm2, NaCl concentration of 3 wt. {\%} with the highest specific surface area (8.2 m2/g), maximum pore volume (0.029 cm3/g) are formed, the largest volume of the particles is characteristic of the nominal pore diameter 62 nm. The values of specific surface area and total pore volume with increase the temperature of calcinations decrease, and the pores are slightly enlarged in diameter. Thus, the obtained data allow predicting operating parameters of the electrolysis to obtain copper - cadmium oxide system of a predetermined porous structure.",
keywords = "Alternating current, Copper-cadmium oxide, Dispersity, Electrolysis, Mesopores, Nanoparticles, Specific surface area",
author = "Dolinina, {Alesya Sergeevna} and Korobochkin, {V. V.} and Usoltseva, {Natalia Vasilievna} and Sudarev, {E. A.} and Bikbaeva, {A. V.} and Popov, {M. V.}",
year = "2016",
doi = "10.4028/www.scientific.net/KEM.712.112",
language = "English",
isbn = "9783035710649",
volume = "712",
series = "Key Engineering Materials",
publisher = "Trans Tech Publications Ltd",
pages = "112--116",
booktitle = "Advanced Materials for Technical and Medical Purpose",

}

TY - GEN

T1 - Textural characteristics of products obtained by electrochemical oxidation of copper and cadmium using alternating current

AU - Dolinina, Alesya Sergeevna

AU - Korobochkin, V. V.

AU - Usoltseva, Natalia Vasilievna

AU - Sudarev, E. A.

AU - Bikbaeva, A. V.

AU - Popov, M. V.

PY - 2016

Y1 - 2016

N2 - The porous structures of nanoparticles of copper and cadmium prepared by alternating current electrochemical synthesis in solutions of acetate of sodium, chlorides of ammonium and sodium were studied. It is established that at current density of 1A/cm2, NaCl concentration of 3 wt. % with the highest specific surface area (8.2 m2/g), maximum pore volume (0.029 cm3/g) are formed, the largest volume of the particles is characteristic of the nominal pore diameter 62 nm. The values of specific surface area and total pore volume with increase the temperature of calcinations decrease, and the pores are slightly enlarged in diameter. Thus, the obtained data allow predicting operating parameters of the electrolysis to obtain copper - cadmium oxide system of a predetermined porous structure.

AB - The porous structures of nanoparticles of copper and cadmium prepared by alternating current electrochemical synthesis in solutions of acetate of sodium, chlorides of ammonium and sodium were studied. It is established that at current density of 1A/cm2, NaCl concentration of 3 wt. % with the highest specific surface area (8.2 m2/g), maximum pore volume (0.029 cm3/g) are formed, the largest volume of the particles is characteristic of the nominal pore diameter 62 nm. The values of specific surface area and total pore volume with increase the temperature of calcinations decrease, and the pores are slightly enlarged in diameter. Thus, the obtained data allow predicting operating parameters of the electrolysis to obtain copper - cadmium oxide system of a predetermined porous structure.

KW - Alternating current

KW - Copper-cadmium oxide

KW - Dispersity

KW - Electrolysis

KW - Mesopores

KW - Nanoparticles

KW - Specific surface area

UR - http://www.scopus.com/inward/record.url?scp=84990842157&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84990842157&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/KEM.712.112

DO - 10.4028/www.scientific.net/KEM.712.112

M3 - Conference contribution

SN - 9783035710649

VL - 712

T3 - Key Engineering Materials

SP - 112

EP - 116

BT - Advanced Materials for Technical and Medical Purpose

PB - Trans Tech Publications Ltd

ER -