Technology of partial discharge detection by means analysis of impulse interaction

A. Mytnikov, V. Strugov

Research output: Contribution to journalConference articlepeer-review

Abstract

In this paper the approach based on impulse analysis for partial discharge (PD) control and identification for high voltage insulation are summarized and the experimental research of impulses of different nature for detection some typical PD defects are discussed. Some physical effects at different voltage levels are shown and a method for the representation and characterization of the PD is introduced. Special test cells with different types of defects such as a streamer corona and pore inside oil-paper insulation of condenser type are used for the investigations. The experimental procedure for PD identification by means of impulse form transformation is shown and discussed. Experimental equipment and measurements are described. It is shown that using of impulse of nanosecond duration and commutative impulse allows the characterization and controlling PD in high voltage insulation.

Original languageEnglish
Article number012070
JournalIOP Conference Series: Materials Science and Engineering
Volume1019
Issue number1
DOIs
Publication statusPublished - 20 Jan 2021
Event14th International Forum on Strategic Technology, IFOST 2019 - Tomsk, Russian Federation
Duration: 14 Oct 201917 Oct 2019

ASJC Scopus subject areas

  • Materials Science(all)
  • Engineering(all)

Fingerprint Dive into the research topics of 'Technology of partial discharge detection by means analysis of impulse interaction'. Together they form a unique fingerprint.

Cite this