SYRINX project: design of the GSI, a 640 kJ inductive energy storage generator

G. Avrillaud, F. Lassalle, F. Bayol, A. Foussat, F. Kovacs, R. Lample, J. F. Leon, J. Mechenin, P. Monjaux, A. Morell, B. Roques, R. Vezinet, B. Kovalchuk, A. Kim, B. Cassany, al et al

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Citation (Scopus)

    Abstract

    The research module GSI, a 640 kJ inductive energy storage generator, is one of the two prototype candidate to bring the future MAG3 z-pinch load driver into operation. The GSI is made of 4 capacitor banks, a water transmission line, a vacuum storage line and a plasma opening switch. Results of parametrical circuit simulations that have been performed on SABER and SCREAMER to chose its electrical features are given. Also, design details of each element and schedules are presented.

    Original languageEnglish
    Title of host publicationDigest of Technical Papers-IEEE International Pulsed Power Conference
    EditorsG. Cooperstein, I. Vitkovitsky
    Place of PublicationPiscataway, NJ, United States
    PublisherIEEE
    Pages679-688
    Number of pages10
    Volume1
    Publication statusPublished - 1997
    EventProceedings of the 1997 11th International Pulsed Power Conference. Part 2 (of 2) - Baltimore, MD, USA
    Duration: 29 Jun 19972 Jul 1997

    Other

    OtherProceedings of the 1997 11th International Pulsed Power Conference. Part 2 (of 2)
    CityBaltimore, MD, USA
    Period29.6.972.7.97

    Fingerprint

    Circuit simulation
    Energy storage
    Electric lines
    Capacitors
    Switches
    Vacuum
    Plasmas
    Water

    ASJC Scopus subject areas

    • Electrical and Electronic Engineering

    Cite this

    Avrillaud, G., Lassalle, F., Bayol, F., Foussat, A., Kovacs, F., Lample, R., ... et al, A. (1997). SYRINX project: design of the GSI, a 640 kJ inductive energy storage generator. In G. Cooperstein, & I. Vitkovitsky (Eds.), Digest of Technical Papers-IEEE International Pulsed Power Conference (Vol. 1, pp. 679-688). Piscataway, NJ, United States: IEEE.

    SYRINX project : design of the GSI, a 640 kJ inductive energy storage generator. / Avrillaud, G.; Lassalle, F.; Bayol, F.; Foussat, A.; Kovacs, F.; Lample, R.; Leon, J. F.; Mechenin, J.; Monjaux, P.; Morell, A.; Roques, B.; Vezinet, R.; Kovalchuk, B.; Kim, A.; Cassany, B.; et al, al.

    Digest of Technical Papers-IEEE International Pulsed Power Conference. ed. / G. Cooperstein; I. Vitkovitsky. Vol. 1 Piscataway, NJ, United States : IEEE, 1997. p. 679-688.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Avrillaud, G, Lassalle, F, Bayol, F, Foussat, A, Kovacs, F, Lample, R, Leon, JF, Mechenin, J, Monjaux, P, Morell, A, Roques, B, Vezinet, R, Kovalchuk, B, Kim, A, Cassany, B & et al, A 1997, SYRINX project: design of the GSI, a 640 kJ inductive energy storage generator. in G Cooperstein & I Vitkovitsky (eds), Digest of Technical Papers-IEEE International Pulsed Power Conference. vol. 1, IEEE, Piscataway, NJ, United States, pp. 679-688, Proceedings of the 1997 11th International Pulsed Power Conference. Part 2 (of 2), Baltimore, MD, USA, 29.6.97.
    Avrillaud G, Lassalle F, Bayol F, Foussat A, Kovacs F, Lample R et al. SYRINX project: design of the GSI, a 640 kJ inductive energy storage generator. In Cooperstein G, Vitkovitsky I, editors, Digest of Technical Papers-IEEE International Pulsed Power Conference. Vol. 1. Piscataway, NJ, United States: IEEE. 1997. p. 679-688
    Avrillaud, G. ; Lassalle, F. ; Bayol, F. ; Foussat, A. ; Kovacs, F. ; Lample, R. ; Leon, J. F. ; Mechenin, J. ; Monjaux, P. ; Morell, A. ; Roques, B. ; Vezinet, R. ; Kovalchuk, B. ; Kim, A. ; Cassany, B. ; et al, al. / SYRINX project : design of the GSI, a 640 kJ inductive energy storage generator. Digest of Technical Papers-IEEE International Pulsed Power Conference. editor / G. Cooperstein ; I. Vitkovitsky. Vol. 1 Piscataway, NJ, United States : IEEE, 1997. pp. 679-688
    @inproceedings{947681a59eae4a50a403c494bbb982bd,
    title = "SYRINX project: design of the GSI, a 640 kJ inductive energy storage generator",
    abstract = "The research module GSI, a 640 kJ inductive energy storage generator, is one of the two prototype candidate to bring the future MAG3 z-pinch load driver into operation. The GSI is made of 4 capacitor banks, a water transmission line, a vacuum storage line and a plasma opening switch. Results of parametrical circuit simulations that have been performed on SABER and SCREAMER to chose its electrical features are given. Also, design details of each element and schedules are presented.",
    author = "G. Avrillaud and F. Lassalle and F. Bayol and A. Foussat and F. Kovacs and R. Lample and Leon, {J. F.} and J. Mechenin and P. Monjaux and A. Morell and B. Roques and R. Vezinet and B. Kovalchuk and A. Kim and B. Cassany and {et al}, al",
    year = "1997",
    language = "English",
    volume = "1",
    pages = "679--688",
    editor = "G. Cooperstein and I. Vitkovitsky",
    booktitle = "Digest of Technical Papers-IEEE International Pulsed Power Conference",
    publisher = "IEEE",

    }

    TY - GEN

    T1 - SYRINX project

    T2 - design of the GSI, a 640 kJ inductive energy storage generator

    AU - Avrillaud, G.

    AU - Lassalle, F.

    AU - Bayol, F.

    AU - Foussat, A.

    AU - Kovacs, F.

    AU - Lample, R.

    AU - Leon, J. F.

    AU - Mechenin, J.

    AU - Monjaux, P.

    AU - Morell, A.

    AU - Roques, B.

    AU - Vezinet, R.

    AU - Kovalchuk, B.

    AU - Kim, A.

    AU - Cassany, B.

    AU - et al, al

    PY - 1997

    Y1 - 1997

    N2 - The research module GSI, a 640 kJ inductive energy storage generator, is one of the two prototype candidate to bring the future MAG3 z-pinch load driver into operation. The GSI is made of 4 capacitor banks, a water transmission line, a vacuum storage line and a plasma opening switch. Results of parametrical circuit simulations that have been performed on SABER and SCREAMER to chose its electrical features are given. Also, design details of each element and schedules are presented.

    AB - The research module GSI, a 640 kJ inductive energy storage generator, is one of the two prototype candidate to bring the future MAG3 z-pinch load driver into operation. The GSI is made of 4 capacitor banks, a water transmission line, a vacuum storage line and a plasma opening switch. Results of parametrical circuit simulations that have been performed on SABER and SCREAMER to chose its electrical features are given. Also, design details of each element and schedules are presented.

    UR - http://www.scopus.com/inward/record.url?scp=0031387588&partnerID=8YFLogxK

    UR - http://www.scopus.com/inward/citedby.url?scp=0031387588&partnerID=8YFLogxK

    M3 - Conference contribution

    AN - SCOPUS:0031387588

    VL - 1

    SP - 679

    EP - 688

    BT - Digest of Technical Papers-IEEE International Pulsed Power Conference

    A2 - Cooperstein, G.

    A2 - Vitkovitsky, I.

    PB - IEEE

    CY - Piscataway, NJ, United States

    ER -