Abstract
The article substantiates the characteristic bending points of blade operating body of the geokhod. The urgency of the research is considered. The information on the work peculiarities of the operating body of the geokhod is given. The method of calculation of the blade operating body of the geokhod is described, in particular, the entire force of the blocked cutting by a single radial blade of the IO of the geokhod is shown, and this force is also represented as a sum of three constituent forces. To establish the purpose and objectives of the study, it is justified to choose the force to overcome the soil resistance by the front face of the blade Pcv , which is proportional to the cross-sectional area of the slot before the front edge of the knife and which depends on the angle and strength of the soil. The limits of integration of the projection of the component of the soil resistance force into the cutting, depending on the width of the cut, on the axis of rotation of the geokhod P 0.cv and on the plane perpendicular to the axis of rotation of the RIO.CV. Based on the study, the tasks for further research have been determined.
| Original language | English |
|---|---|
| Article number | 012005 |
| Journal | IOP Conference Series: Materials Science and Engineering |
| Volume | 441 |
| Issue number | 1 |
| DOIs | |
| Publication status | Published - 2 Nov 2018 |
| Event | International Scientific and Practical Conference on Innovations in Engineering and Technology, ISPCIET 2018 - Veliky Novgorod, Russian Federation Duration: 28 Jun 2018 → 29 Jun 2018 |
Fingerprint
ASJC Scopus subject areas
- Materials Science(all)
- Engineering(all)
Cite this
Substantiation of characteristic bending points of the blade operating body of the geokhod. / Aksenov, V. V.; Efremenkov, A. B.; Yu Sadovets, V.; Pashkov, D. A.
In: IOP Conference Series: Materials Science and Engineering, Vol. 441, No. 1, 012005, 02.11.2018.Research output: Contribution to journal › Conference article
}
TY - JOUR
T1 - Substantiation of characteristic bending points of the blade operating body of the geokhod
AU - Aksenov, V. V.
AU - Efremenkov, A. B.
AU - Yu Sadovets, V.
AU - Pashkov, D. A.
PY - 2018/11/2
Y1 - 2018/11/2
N2 - The article substantiates the characteristic bending points of blade operating body of the geokhod. The urgency of the research is considered. The information on the work peculiarities of the operating body of the geokhod is given. The method of calculation of the blade operating body of the geokhod is described, in particular, the entire force of the blocked cutting by a single radial blade of the IO of the geokhod is shown, and this force is also represented as a sum of three constituent forces. To establish the purpose and objectives of the study, it is justified to choose the force to overcome the soil resistance by the front face of the blade Pcv , which is proportional to the cross-sectional area of the slot before the front edge of the knife and which depends on the angle and strength of the soil. The limits of integration of the projection of the component of the soil resistance force into the cutting, depending on the width of the cut, on the axis of rotation of the geokhod P 0.cv and on the plane perpendicular to the axis of rotation of the RIO.CV. Based on the study, the tasks for further research have been determined.
AB - The article substantiates the characteristic bending points of blade operating body of the geokhod. The urgency of the research is considered. The information on the work peculiarities of the operating body of the geokhod is given. The method of calculation of the blade operating body of the geokhod is described, in particular, the entire force of the blocked cutting by a single radial blade of the IO of the geokhod is shown, and this force is also represented as a sum of three constituent forces. To establish the purpose and objectives of the study, it is justified to choose the force to overcome the soil resistance by the front face of the blade Pcv , which is proportional to the cross-sectional area of the slot before the front edge of the knife and which depends on the angle and strength of the soil. The limits of integration of the projection of the component of the soil resistance force into the cutting, depending on the width of the cut, on the axis of rotation of the geokhod P 0.cv and on the plane perpendicular to the axis of rotation of the RIO.CV. Based on the study, the tasks for further research have been determined.
UR - http://www.scopus.com/inward/record.url?scp=85056635697&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=85056635697&partnerID=8YFLogxK
U2 - 10.1088/1757-899X/441/1/012005
DO - 10.1088/1757-899X/441/1/012005
M3 - Conference article
VL - 441
JO - IOP Conference Series: Materials Science and Engineering
JF - IOP Conference Series: Materials Science and Engineering
SN - 1757-8981
IS - 1
M1 - 012005
ER -