Abstract
The paper presents the findings of an investigation on volt-ampere characteristics of the diode with explosive emission cathodes of different constructions (blade metal-dielectric (MD-cathode) and solid graphite cathodes) under the change of the anode-cathode gap in wide ranges. The investigations were carried out using the TEA-500 pulsed electron accelerator. The total current of the electron beam was measured using the Faraday cup (FC). A 0.5-mm foiled glass fiber laminate was used as an emitting edge of the cathode in the experimental study with the explosive emission blade MD-cathode. Based on the obtained results, the conclusion was made that the graphite cathode has the most effective efficiency factor.
| Original language | English |
|---|---|
| Article number | 012024 |
| Journal | Journal of Physics: Conference Series |
| Volume | 552 |
| Issue number | 1 |
| DOIs | |
| Publication status | Published - 2014 |
Fingerprint
ASJC Scopus subject areas
- Physics and Astronomy(all)
Cite this
Study on nanosecond pulsed electron beam generation. / Ponomarev, Denis Vladimirovich; Kholodnaya, G.; Remnev, G.; Kaikanov, M.; Sazonov, R.
In: Journal of Physics: Conference Series, Vol. 552, No. 1, 012024, 2014.Research output: Contribution to journal › Article
}
TY - JOUR
T1 - Study on nanosecond pulsed electron beam generation
AU - Ponomarev, Denis Vladimirovich
AU - Kholodnaya, G.
AU - Remnev, G.
AU - Kaikanov, M.
AU - Sazonov, R.
PY - 2014
Y1 - 2014
N2 - The paper presents the findings of an investigation on volt-ampere characteristics of the diode with explosive emission cathodes of different constructions (blade metal-dielectric (MD-cathode) and solid graphite cathodes) under the change of the anode-cathode gap in wide ranges. The investigations were carried out using the TEA-500 pulsed electron accelerator. The total current of the electron beam was measured using the Faraday cup (FC). A 0.5-mm foiled glass fiber laminate was used as an emitting edge of the cathode in the experimental study with the explosive emission blade MD-cathode. Based on the obtained results, the conclusion was made that the graphite cathode has the most effective efficiency factor.
AB - The paper presents the findings of an investigation on volt-ampere characteristics of the diode with explosive emission cathodes of different constructions (blade metal-dielectric (MD-cathode) and solid graphite cathodes) under the change of the anode-cathode gap in wide ranges. The investigations were carried out using the TEA-500 pulsed electron accelerator. The total current of the electron beam was measured using the Faraday cup (FC). A 0.5-mm foiled glass fiber laminate was used as an emitting edge of the cathode in the experimental study with the explosive emission blade MD-cathode. Based on the obtained results, the conclusion was made that the graphite cathode has the most effective efficiency factor.
UR - http://www.scopus.com/inward/record.url?scp=84911389344&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=84911389344&partnerID=8YFLogxK
U2 - 10.1088/1742-6596/552/1/012024
DO - 10.1088/1742-6596/552/1/012024
M3 - Article
AN - SCOPUS:84911389344
VL - 552
JO - Journal of Physics: Conference Series
JF - Journal of Physics: Conference Series
SN - 1742-6588
IS - 1
M1 - 012024
ER -