Study of the hydrogen - Metal systems

N. N. Nikitenkov, A. M. Hashhash, T. I. Sigfusson, E. N. Kudryavtzeva, V. A. Sypchenko, Yu I. Tyurin, I. P. Chernov

Research output: Contribution to journalArticle

5 Citations (Scopus)

Abstract

Hydrogen accumulation in samples of a palladium and 12Kh18N10T steel at the hydrogen charging by the electrolytic method and hydrogen release from these samples at its electron and X-ray irradiation are studied. Palladium was used as a comparison material (as most efficiently solvent hydrogen known among the simple materials). It is established that a capture effectiveness of hydrogen from an electrolyte (1 M H 2SO 4 at current density is 0.5 A cm -2) for palladium is 3-4 orders more than for steel. The hydrogen yield nonlinearly increases with growing of electron current density and electron energy is more than 40 keV under electron irradiation of saturated palladium and 12Kh18N10T steel samples. About 90% of the hydrogen had removed from hydrogen saturated palladium samples and only 60% from steel under electron beam with energy 40 keV and current density ≈ 20 μA cm -2 for 1 h of irradiation. It is necessary to increase the energy of electrons from 40 to 100 keV for the more effective removal of hydrogen.

Original languageEnglish
Pages (from-to)78-81
Number of pages4
JournalActa Physica Polonica A
Volume121
Issue number1
Publication statusPublished - Jan 2012

Fingerprint

hydrogen
palladium
metals
steels
current density
irradiation
electrons
electron irradiation
charging
energy
electrolytes
electron beams
electron energy
x rays

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Cite this

Study of the hydrogen - Metal systems. / Nikitenkov, N. N.; Hashhash, A. M.; Sigfusson, T. I.; Kudryavtzeva, E. N.; Sypchenko, V. A.; Tyurin, Yu I.; Chernov, I. P.

In: Acta Physica Polonica A, Vol. 121, No. 1, 01.2012, p. 78-81.

Research output: Contribution to journalArticle

Nikitenkov, NN, Hashhash, AM, Sigfusson, TI, Kudryavtzeva, EN, Sypchenko, VA, Tyurin, YI & Chernov, IP 2012, 'Study of the hydrogen - Metal systems', Acta Physica Polonica A, vol. 121, no. 1, pp. 78-81.
Nikitenkov NN, Hashhash AM, Sigfusson TI, Kudryavtzeva EN, Sypchenko VA, Tyurin YI et al. Study of the hydrogen - Metal systems. Acta Physica Polonica A. 2012 Jan;121(1):78-81.
Nikitenkov, N. N. ; Hashhash, A. M. ; Sigfusson, T. I. ; Kudryavtzeva, E. N. ; Sypchenko, V. A. ; Tyurin, Yu I. ; Chernov, I. P. / Study of the hydrogen - Metal systems. In: Acta Physica Polonica A. 2012 ; Vol. 121, No. 1. pp. 78-81.
@article{9dd0c43dff254c159e47d07a8a745969,
title = "Study of the hydrogen - Metal systems",
abstract = "Hydrogen accumulation in samples of a palladium and 12Kh18N10T steel at the hydrogen charging by the electrolytic method and hydrogen release from these samples at its electron and X-ray irradiation are studied. Palladium was used as a comparison material (as most efficiently solvent hydrogen known among the simple materials). It is established that a capture effectiveness of hydrogen from an electrolyte (1 M H 2SO 4 at current density is 0.5 A cm -2) for palladium is 3-4 orders more than for steel. The hydrogen yield nonlinearly increases with growing of electron current density and electron energy is more than 40 keV under electron irradiation of saturated palladium and 12Kh18N10T steel samples. About 90{\%} of the hydrogen had removed from hydrogen saturated palladium samples and only 60{\%} from steel under electron beam with energy 40 keV and current density ≈ 20 μA cm -2 for 1 h of irradiation. It is necessary to increase the energy of electrons from 40 to 100 keV for the more effective removal of hydrogen.",
author = "Nikitenkov, {N. N.} and Hashhash, {A. M.} and Sigfusson, {T. I.} and Kudryavtzeva, {E. N.} and Sypchenko, {V. A.} and Tyurin, {Yu I.} and Chernov, {I. P.}",
year = "2012",
month = "1",
language = "English",
volume = "121",
pages = "78--81",
journal = "Acta Physica Polonica B",
issn = "0587-4246",
publisher = "Polish Academy of Sciences Publishing House",
number = "1",

}

TY - JOUR

T1 - Study of the hydrogen - Metal systems

AU - Nikitenkov, N. N.

AU - Hashhash, A. M.

AU - Sigfusson, T. I.

AU - Kudryavtzeva, E. N.

AU - Sypchenko, V. A.

AU - Tyurin, Yu I.

AU - Chernov, I. P.

PY - 2012/1

Y1 - 2012/1

N2 - Hydrogen accumulation in samples of a palladium and 12Kh18N10T steel at the hydrogen charging by the electrolytic method and hydrogen release from these samples at its electron and X-ray irradiation are studied. Palladium was used as a comparison material (as most efficiently solvent hydrogen known among the simple materials). It is established that a capture effectiveness of hydrogen from an electrolyte (1 M H 2SO 4 at current density is 0.5 A cm -2) for palladium is 3-4 orders more than for steel. The hydrogen yield nonlinearly increases with growing of electron current density and electron energy is more than 40 keV under electron irradiation of saturated palladium and 12Kh18N10T steel samples. About 90% of the hydrogen had removed from hydrogen saturated palladium samples and only 60% from steel under electron beam with energy 40 keV and current density ≈ 20 μA cm -2 for 1 h of irradiation. It is necessary to increase the energy of electrons from 40 to 100 keV for the more effective removal of hydrogen.

AB - Hydrogen accumulation in samples of a palladium and 12Kh18N10T steel at the hydrogen charging by the electrolytic method and hydrogen release from these samples at its electron and X-ray irradiation are studied. Palladium was used as a comparison material (as most efficiently solvent hydrogen known among the simple materials). It is established that a capture effectiveness of hydrogen from an electrolyte (1 M H 2SO 4 at current density is 0.5 A cm -2) for palladium is 3-4 orders more than for steel. The hydrogen yield nonlinearly increases with growing of electron current density and electron energy is more than 40 keV under electron irradiation of saturated palladium and 12Kh18N10T steel samples. About 90% of the hydrogen had removed from hydrogen saturated palladium samples and only 60% from steel under electron beam with energy 40 keV and current density ≈ 20 μA cm -2 for 1 h of irradiation. It is necessary to increase the energy of electrons from 40 to 100 keV for the more effective removal of hydrogen.

UR - http://www.scopus.com/inward/record.url?scp=84856088200&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84856088200&partnerID=8YFLogxK

M3 - Article

VL - 121

SP - 78

EP - 81

JO - Acta Physica Polonica B

JF - Acta Physica Polonica B

SN - 0587-4246

IS - 1

ER -