Study of the character of deformation of hard alloy WC-steel 110G13

S. F. Gnyusov, S. N. Kul'kov, A. V. Paul', Yu F. Ivanov, E. V. Kozlov

Research output: Contribution to journalArticle

Abstract

The methods of optical metallography, x-ray diffraction analysis, scanning electron microscopy, and transmission diffraction microscopy are used to study the phase composition and defect structure of hard alloy WC-30 wt. % steel 110G13 in the sintered and quenched states and their evolution with deformation. Deformation was done by compression. It is shown that quenching permits greater plastic deformation and strain-hardening of the binding phase without disturbing continuity in the thin layers between carbide particles. In this case, the load is transmitted to the carbide particles, and the latter are involved in plastic flow. Plastic deformation of the particles in turn makes it possible to simultaneously obtain high values of hardness, strength, and toughness in the alloy. The different stages of the stress-strain curves and the evolution of the defect structure are also compared as part of the study.

Original languageEnglish
Pages (from-to)130-136
Number of pages7
JournalRussian Physics Journal
Volume37
Issue number2
DOIs
Publication statusPublished - Feb 1994

Fingerprint

steels
carbides
plastic deformation
metallography
plastic flow
strain hardening
defects
toughness
continuity
x ray diffraction
hardness
quenching
microscopy
scanning electron microscopy
curves
diffraction

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Cite this

Study of the character of deformation of hard alloy WC-steel 110G13. / Gnyusov, S. F.; Kul'kov, S. N.; Paul', A. V.; Ivanov, Yu F.; Kozlov, E. V.

In: Russian Physics Journal, Vol. 37, No. 2, 02.1994, p. 130-136.

Research output: Contribution to journalArticle

Gnyusov, S. F. ; Kul'kov, S. N. ; Paul', A. V. ; Ivanov, Yu F. ; Kozlov, E. V. / Study of the character of deformation of hard alloy WC-steel 110G13. In: Russian Physics Journal. 1994 ; Vol. 37, No. 2. pp. 130-136.
@article{fbee55270bba49229c6aefdedb2b49a1,
title = "Study of the character of deformation of hard alloy WC-steel 110G13",
abstract = "The methods of optical metallography, x-ray diffraction analysis, scanning electron microscopy, and transmission diffraction microscopy are used to study the phase composition and defect structure of hard alloy WC-30 wt. {\%} steel 110G13 in the sintered and quenched states and their evolution with deformation. Deformation was done by compression. It is shown that quenching permits greater plastic deformation and strain-hardening of the binding phase without disturbing continuity in the thin layers between carbide particles. In this case, the load is transmitted to the carbide particles, and the latter are involved in plastic flow. Plastic deformation of the particles in turn makes it possible to simultaneously obtain high values of hardness, strength, and toughness in the alloy. The different stages of the stress-strain curves and the evolution of the defect structure are also compared as part of the study.",
author = "Gnyusov, {S. F.} and Kul'kov, {S. N.} and Paul', {A. V.} and Ivanov, {Yu F.} and Kozlov, {E. V.}",
year = "1994",
month = "2",
doi = "10.1007/BF00559058",
language = "English",
volume = "37",
pages = "130--136",
journal = "Russian Physics Journal",
issn = "1064-8887",
publisher = "Consultants Bureau",
number = "2",

}

TY - JOUR

T1 - Study of the character of deformation of hard alloy WC-steel 110G13

AU - Gnyusov, S. F.

AU - Kul'kov, S. N.

AU - Paul', A. V.

AU - Ivanov, Yu F.

AU - Kozlov, E. V.

PY - 1994/2

Y1 - 1994/2

N2 - The methods of optical metallography, x-ray diffraction analysis, scanning electron microscopy, and transmission diffraction microscopy are used to study the phase composition and defect structure of hard alloy WC-30 wt. % steel 110G13 in the sintered and quenched states and their evolution with deformation. Deformation was done by compression. It is shown that quenching permits greater plastic deformation and strain-hardening of the binding phase without disturbing continuity in the thin layers between carbide particles. In this case, the load is transmitted to the carbide particles, and the latter are involved in plastic flow. Plastic deformation of the particles in turn makes it possible to simultaneously obtain high values of hardness, strength, and toughness in the alloy. The different stages of the stress-strain curves and the evolution of the defect structure are also compared as part of the study.

AB - The methods of optical metallography, x-ray diffraction analysis, scanning electron microscopy, and transmission diffraction microscopy are used to study the phase composition and defect structure of hard alloy WC-30 wt. % steel 110G13 in the sintered and quenched states and their evolution with deformation. Deformation was done by compression. It is shown that quenching permits greater plastic deformation and strain-hardening of the binding phase without disturbing continuity in the thin layers between carbide particles. In this case, the load is transmitted to the carbide particles, and the latter are involved in plastic flow. Plastic deformation of the particles in turn makes it possible to simultaneously obtain high values of hardness, strength, and toughness in the alloy. The different stages of the stress-strain curves and the evolution of the defect structure are also compared as part of the study.

UR - http://www.scopus.com/inward/record.url?scp=34249768039&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=34249768039&partnerID=8YFLogxK

U2 - 10.1007/BF00559058

DO - 10.1007/BF00559058

M3 - Article

VL - 37

SP - 130

EP - 136

JO - Russian Physics Journal

JF - Russian Physics Journal

SN - 1064-8887

IS - 2

ER -