Abstract
The results of industrial tests of gun drills with the diameter of 2.05 mm with carbide and with steel stems are given. It is shown that the gun drills with cemented carbide stem and especially AlTiN coating have a greater resistance and greater accuracy diametrical holes sizes in comparison to gun drill with steel stem.
| Original language | English |
|---|---|
| Title of host publication | IOP Conference Series: Materials Science and Engineering |
| Publisher | Institute of Physics Publishing |
| Volume | 66 |
| Edition | 1 |
| DOIs | |
| Publication status | Published - 2014 |
| Event | 20th International Conference for Students and Young Scientists: Modern Techniques and Technologies, MTT 2014 - Tomsk, Russian Federation Duration: 14 Apr 2014 → 18 Apr 2014 |
Other
| Other | 20th International Conference for Students and Young Scientists: Modern Techniques and Technologies, MTT 2014 |
|---|---|
| Country | Russian Federation |
| City | Tomsk |
| Period | 14.4.14 → 18.4.14 |
Fingerprint
ASJC Scopus subject areas
- Engineering(all)
- Materials Science(all)
Cite this
Study of accuracy and surface roughness of holes in comparative testing of small diameters gun drills. / Kirsanov, S. V.; Babaev, Artem Sergeevich.
IOP Conference Series: Materials Science and Engineering. Vol. 66 1. ed. Institute of Physics Publishing, 2014. 012030.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
}
TY - GEN
T1 - Study of accuracy and surface roughness of holes in comparative testing of small diameters gun drills
AU - Kirsanov, S. V.
AU - Babaev, Artem Sergeevich
PY - 2014
Y1 - 2014
N2 - The results of industrial tests of gun drills with the diameter of 2.05 mm with carbide and with steel stems are given. It is shown that the gun drills with cemented carbide stem and especially AlTiN coating have a greater resistance and greater accuracy diametrical holes sizes in comparison to gun drill with steel stem.
AB - The results of industrial tests of gun drills with the diameter of 2.05 mm with carbide and with steel stems are given. It is shown that the gun drills with cemented carbide stem and especially AlTiN coating have a greater resistance and greater accuracy diametrical holes sizes in comparison to gun drill with steel stem.
UR - http://www.scopus.com/inward/record.url?scp=84907789687&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=84907789687&partnerID=8YFLogxK
U2 - 10.1088/1757-899X/66/1/012030
DO - 10.1088/1757-899X/66/1/012030
M3 - Conference contribution
AN - SCOPUS:84907789687
VL - 66
BT - IOP Conference Series: Materials Science and Engineering
PB - Institute of Physics Publishing
ER -