Study cracking large forgings of low carbon steel grade st52, 3n pressure treatment

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

The paper presents an electron-microscopic analysis of structure, phase and stress-strain state of forging material. It was found out, that dislocations in ferritic grains and pearlite layers of forgings, cracked after manufacturing processes are half as large against those in standard material. Metal in this state is characterized by an increased concentration of lamellar sulfides. It is also stated that disadvantageous structural state is formed due to high concentration of carbon which causes metal over-heating both when forming and in final heat treatment.

Original languageEnglish
Title of host publicationApplied Mechanics and Materials
PublisherTrans Tech Publications Ltd
Pages64-68
Number of pages5
Volume682
ISBN (Print)9783038352815
DOIs
Publication statusPublished - 2014
Event5th International Scientific Practical Conference on Innovative Technologies and Economics in Engineering, 2014 - Yurga, Russian Federation
Duration: 22 May 201423 May 2014

Publication series

NameApplied Mechanics and Materials
Volume682
ISSN (Print)16609336
ISSN (Electronic)16627482

Other

Other5th International Scientific Practical Conference on Innovative Technologies and Economics in Engineering, 2014
CountryRussian Federation
CityYurga
Period22.5.1423.5.14

Fingerprint

Forgings
Low carbon steel
Pearlite
Phase structure
Forging
Metals
Heat treatment
Heating
Carbon
Electrons
Sulfides

Keywords

  • Defect substructure
  • Electron-microscopic analysis
  • Ferrite
  • Ferritic grains
  • Pearlite
  • Steel

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Valuev, D. V., Valueva, A. V., & Serikbol, A. (2014). Study cracking large forgings of low carbon steel grade st52, 3n pressure treatment. In Applied Mechanics and Materials (Vol. 682, pp. 64-68). (Applied Mechanics and Materials; Vol. 682). Trans Tech Publications Ltd. https://doi.org/10.4028/www.scientific.net/AMM.682.64

Study cracking large forgings of low carbon steel grade st52, 3n pressure treatment. / Valuev, D. V.; Valueva, A. V.; Serikbol, A.

Applied Mechanics and Materials. Vol. 682 Trans Tech Publications Ltd, 2014. p. 64-68 (Applied Mechanics and Materials; Vol. 682).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Valuev, DV, Valueva, AV & Serikbol, A 2014, Study cracking large forgings of low carbon steel grade st52, 3n pressure treatment. in Applied Mechanics and Materials. vol. 682, Applied Mechanics and Materials, vol. 682, Trans Tech Publications Ltd, pp. 64-68, 5th International Scientific Practical Conference on Innovative Technologies and Economics in Engineering, 2014, Yurga, Russian Federation, 22.5.14. https://doi.org/10.4028/www.scientific.net/AMM.682.64
Valuev DV, Valueva AV, Serikbol A. Study cracking large forgings of low carbon steel grade st52, 3n pressure treatment. In Applied Mechanics and Materials. Vol. 682. Trans Tech Publications Ltd. 2014. p. 64-68. (Applied Mechanics and Materials). https://doi.org/10.4028/www.scientific.net/AMM.682.64
Valuev, D. V. ; Valueva, A. V. ; Serikbol, A. / Study cracking large forgings of low carbon steel grade st52, 3n pressure treatment. Applied Mechanics and Materials. Vol. 682 Trans Tech Publications Ltd, 2014. pp. 64-68 (Applied Mechanics and Materials).
@inproceedings{ad4e5477c77444e68a621b44f590157c,
title = "Study cracking large forgings of low carbon steel grade st52, 3n pressure treatment",
abstract = "The paper presents an electron-microscopic analysis of structure, phase and stress-strain state of forging material. It was found out, that dislocations in ferritic grains and pearlite layers of forgings, cracked after manufacturing processes are half as large against those in standard material. Metal in this state is characterized by an increased concentration of lamellar sulfides. It is also stated that disadvantageous structural state is formed due to high concentration of carbon which causes metal over-heating both when forming and in final heat treatment.",
keywords = "Defect substructure, Electron-microscopic analysis, Ferrite, Ferritic grains, Pearlite, Steel",
author = "Valuev, {D. V.} and Valueva, {A. V.} and A. Serikbol",
year = "2014",
doi = "10.4028/www.scientific.net/AMM.682.64",
language = "English",
isbn = "9783038352815",
volume = "682",
series = "Applied Mechanics and Materials",
publisher = "Trans Tech Publications Ltd",
pages = "64--68",
booktitle = "Applied Mechanics and Materials",

}

TY - GEN

T1 - Study cracking large forgings of low carbon steel grade st52, 3n pressure treatment

AU - Valuev, D. V.

AU - Valueva, A. V.

AU - Serikbol, A.

PY - 2014

Y1 - 2014

N2 - The paper presents an electron-microscopic analysis of structure, phase and stress-strain state of forging material. It was found out, that dislocations in ferritic grains and pearlite layers of forgings, cracked after manufacturing processes are half as large against those in standard material. Metal in this state is characterized by an increased concentration of lamellar sulfides. It is also stated that disadvantageous structural state is formed due to high concentration of carbon which causes metal over-heating both when forming and in final heat treatment.

AB - The paper presents an electron-microscopic analysis of structure, phase and stress-strain state of forging material. It was found out, that dislocations in ferritic grains and pearlite layers of forgings, cracked after manufacturing processes are half as large against those in standard material. Metal in this state is characterized by an increased concentration of lamellar sulfides. It is also stated that disadvantageous structural state is formed due to high concentration of carbon which causes metal over-heating both when forming and in final heat treatment.

KW - Defect substructure

KW - Electron-microscopic analysis

KW - Ferrite

KW - Ferritic grains

KW - Pearlite

KW - Steel

UR - http://www.scopus.com/inward/record.url?scp=84921886261&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84921886261&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/AMM.682.64

DO - 10.4028/www.scientific.net/AMM.682.64

M3 - Conference contribution

AN - SCOPUS:84921886261

SN - 9783038352815

VL - 682

T3 - Applied Mechanics and Materials

SP - 64

EP - 68

BT - Applied Mechanics and Materials

PB - Trans Tech Publications Ltd

ER -