Structure of sintered Ti – TiC materials

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

The results of studying of sintered powder Ti-TiC compositions are presented in this paper. Materials varying with carbon content and titanium powder dispersity sintered at 1300°C and were investigated. Sintering duration, carbon content and titanium dispersity were shown to influence on microstructure, average grain size, as well as porosity and crystal lattice parameters of titanium and titanium carbide.

Original languageEnglish
Title of host publicationInnovative Technologies and Economics in Engineering
PublisherTrans Tech Publications Ltd
Pages127-131
Number of pages5
Volume682
ISBN (Electronic)9783038352815, 9783038352815
DOIs
Publication statusPublished - 2014
Event5th International Scientific Practical Conference on Innovative Technologies and Economics in Engineering, 2014 - Yurga, Russian Federation
Duration: 22 May 201423 May 2014

Publication series

NameApplied Mechanics and Materials
Volume682
ISSN (Print)16609336
ISSN (Electronic)16627482

Conference

Conference5th International Scientific Practical Conference on Innovative Technologies and Economics in Engineering, 2014
CountryRussian Federation
CityYurga
Period22.5.1423.5.14

Fingerprint

Titanium
Powders
Titanium carbide
Carbon
Crystal lattices
Lattice constants
Sintering
Porosity
Microstructure
Chemical analysis

Keywords

  • Grain size
  • Porosity
  • Sintering
  • Titanium
  • Titanium carbide

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Krinitcyn, M. G., Pribytkov, G. A., & Korosteleva, E. N. (2014). Structure of sintered Ti – TiC materials. In Innovative Technologies and Economics in Engineering (Vol. 682, pp. 127-131). (Applied Mechanics and Materials; Vol. 682). Trans Tech Publications Ltd. https://doi.org/10.4028/www.scientific.net/AMM.682.127

Structure of sintered Ti – TiC materials. / Krinitcyn, Maxim Germanovich; Pribytkov, G. A.; Korosteleva, E. N.

Innovative Technologies and Economics in Engineering. Vol. 682 Trans Tech Publications Ltd, 2014. p. 127-131 (Applied Mechanics and Materials; Vol. 682).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Krinitcyn, MG, Pribytkov, GA & Korosteleva, EN 2014, Structure of sintered Ti – TiC materials. in Innovative Technologies and Economics in Engineering. vol. 682, Applied Mechanics and Materials, vol. 682, Trans Tech Publications Ltd, pp. 127-131, 5th International Scientific Practical Conference on Innovative Technologies and Economics in Engineering, 2014, Yurga, Russian Federation, 22.5.14. https://doi.org/10.4028/www.scientific.net/AMM.682.127
Krinitcyn MG, Pribytkov GA, Korosteleva EN. Structure of sintered Ti – TiC materials. In Innovative Technologies and Economics in Engineering. Vol. 682. Trans Tech Publications Ltd. 2014. p. 127-131. (Applied Mechanics and Materials). https://doi.org/10.4028/www.scientific.net/AMM.682.127
Krinitcyn, Maxim Germanovich ; Pribytkov, G. A. ; Korosteleva, E. N. / Structure of sintered Ti – TiC materials. Innovative Technologies and Economics in Engineering. Vol. 682 Trans Tech Publications Ltd, 2014. pp. 127-131 (Applied Mechanics and Materials).
@inproceedings{d80cba3dd3c244a0b8019fe8650ce57f,
title = "Structure of sintered Ti – TiC materials",
abstract = "The results of studying of sintered powder Ti-TiC compositions are presented in this paper. Materials varying with carbon content and titanium powder dispersity sintered at 1300°C and were investigated. Sintering duration, carbon content and titanium dispersity were shown to influence on microstructure, average grain size, as well as porosity and crystal lattice parameters of titanium and titanium carbide.",
keywords = "Grain size, Porosity, Sintering, Titanium, Titanium carbide",
author = "Krinitcyn, {Maxim Germanovich} and Pribytkov, {G. A.} and Korosteleva, {E. N.}",
year = "2014",
doi = "10.4028/www.scientific.net/AMM.682.127",
language = "English",
volume = "682",
series = "Applied Mechanics and Materials",
publisher = "Trans Tech Publications Ltd",
pages = "127--131",
booktitle = "Innovative Technologies and Economics in Engineering",

}

TY - GEN

T1 - Structure of sintered Ti – TiC materials

AU - Krinitcyn, Maxim Germanovich

AU - Pribytkov, G. A.

AU - Korosteleva, E. N.

PY - 2014

Y1 - 2014

N2 - The results of studying of sintered powder Ti-TiC compositions are presented in this paper. Materials varying with carbon content and titanium powder dispersity sintered at 1300°C and were investigated. Sintering duration, carbon content and titanium dispersity were shown to influence on microstructure, average grain size, as well as porosity and crystal lattice parameters of titanium and titanium carbide.

AB - The results of studying of sintered powder Ti-TiC compositions are presented in this paper. Materials varying with carbon content and titanium powder dispersity sintered at 1300°C and were investigated. Sintering duration, carbon content and titanium dispersity were shown to influence on microstructure, average grain size, as well as porosity and crystal lattice parameters of titanium and titanium carbide.

KW - Grain size

KW - Porosity

KW - Sintering

KW - Titanium

KW - Titanium carbide

UR - http://www.scopus.com/inward/record.url?scp=84921881702&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84921881702&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/AMM.682.127

DO - 10.4028/www.scientific.net/AMM.682.127

M3 - Conference contribution

AN - SCOPUS:84921881702

VL - 682

T3 - Applied Mechanics and Materials

SP - 127

EP - 131

BT - Innovative Technologies and Economics in Engineering

PB - Trans Tech Publications Ltd

ER -