Stress and Strain State Analysis of Defective Pipeline Portion

P. V. Burkov, S. P. Burkova, S. A. Knaub

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Abstract

The paper presents computer simulation results of the pipeline having defects in a welded joint. Autodesk Inventor software is used for simulation of the stress and strain state of the pipeline. Places of the possible failure and stress concentrators are predicted on the defective portion of the pipeline.

Original languageEnglish
Title of host publicationIOP Conference Series: Materials Science and Engineering
PublisherInstitute of Physics Publishing
Volume91
Edition1
DOIs
Publication statusPublished - 14 Sep 2015
Event6th International Scientific Practical Conference on Innovative Technologies and Economics in Engineering - Yurga, Russian Federation
Duration: 21 May 201523 May 2015

Other

Other6th International Scientific Practical Conference on Innovative Technologies and Economics in Engineering
CountryRussian Federation
CityYurga
Period21.5.1523.5.15

ASJC Scopus subject areas

  • Engineering(all)
  • Materials Science(all)

Fingerprint Dive into the research topics of 'Stress and Strain State Analysis of Defective Pipeline Portion'. Together they form a unique fingerprint.

  • Cite this

    Burkov, P. V., Burkova, S. P., & Knaub, S. A. (2015). Stress and Strain State Analysis of Defective Pipeline Portion. In IOP Conference Series: Materials Science and Engineering (1 ed., Vol. 91). [012055] Institute of Physics Publishing. https://doi.org/10.1088/1757-899X/91/1/012055