Abstract
This paper presents the stability improvement of a multimachine power system connected with a large-scale hybrid wind-photovoltaic (PV) farm using an energy-storage unit based on supercapacitor (SC). The operating characteristics of the hybrid wind-PV farm are simulated by an equivalent aggregated 300-MW wind-turbine generator (WTG) based on permanent-magnet synchronous generator and an equivalent aggregated 75-MW PV array. The WTG and the PV array are connected to a common dc link through a voltage-source converter and a dc/dc boost converter, respectively. The power of the common dc link is transferred to the multimachine power system through a voltage-source inverter, step-up transformers, and a connection line. The SC-based energy-storage unit, which is integrated into the common dc link through a bidirectional dc/dc converter, is employed for smoothing out the power fluctuations due to variations of wind speed and/or solar irradiance. A proportional-integral-derivative (PID)-supplementary damping controller (PID-SDC) is designed for the bidirectional dc/dc converter of the SC to enhance the damping characteristics of the low-frequency oscillations associated with the studied multimachine power system. The root loci of the studied system are examined under wide ranges of wind speed and solar irradiance. The effectiveness of the proposed SC joined with the PID-SDC on improving the performance of the studied system under different disturbance conditions is also demonstrated using time-domain simulations.
Original language | English |
---|---|
Article number | 8031031 |
Pages (from-to) | 50-60 |
Number of pages | 11 |
Journal | IEEE Transactions on Industry Applications |
Volume | 54 |
Issue number | 1 |
DOIs | |
Publication status | Published - 1 Jan 2018 |
Keywords
- Damping controller
- eigenvalues
- hybrid wind-photovoltaic farm
- multimachine power system
- permanent-magnet synchronous generator (PMSG)
- root-loci analysis
- stability
- supercapacitor (SC)
- time-domain simulations
ASJC Scopus subject areas
- Control and Systems Engineering
- Industrial and Manufacturing Engineering
- Electrical and Electronic Engineering