Some features of the formation of the surface microrelief of steel under ultrasonic finishing treatment

Zh G. Kovalevskaya, P. V. Uvarkin, A. I. Tolmachev

Research output: Contribution to journalArticle

2 Citations (Scopus)

Abstract

The surface microrelief of carbon steel after ultrasonic finishing treatment was studied using a Micro Measure 3D Station three-dimensional contactless profilometer. The effect of the parameters of the initial surface on the microrelief of the obtained surface was considered. Some fea- tures of the formation of a microrelief under the regimes of hardening and finishing hardening treat- ment were described. To remove rehardening traces on the surface layer, introduction of a geoactivat- ing material into the zone of treatment was proposed.

Original languageEnglish
Pages (from-to)153-158
Number of pages6
JournalRussian Journal of Nondestructive Testing
Volume48
Issue number3
DOIs
Publication statusPublished - 1 Mar 2012

Fingerprint

Steel
ultrasonics
Ultrasonics
steels
hardening
Hardening
profilometers
carbon steels
surface layers
stations
Carbon steel

Keywords

  • Carbon steel
  • Geoactivating material
  • Three-dimensional contactless profilometer
  • Ultrasonic finishing treatment

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

Cite this

Some features of the formation of the surface microrelief of steel under ultrasonic finishing treatment. / Kovalevskaya, Zh G.; Uvarkin, P. V.; Tolmachev, A. I.

In: Russian Journal of Nondestructive Testing, Vol. 48, No. 3, 01.03.2012, p. 153-158.

Research output: Contribution to journalArticle

@article{41dc8d90f7e7402dabc99a2f0a7608f6,
title = "Some features of the formation of the surface microrelief of steel under ultrasonic finishing treatment",
abstract = "The surface microrelief of carbon steel after ultrasonic finishing treatment was studied using a Micro Measure 3D Station three-dimensional contactless profilometer. The effect of the parameters of the initial surface on the microrelief of the obtained surface was considered. Some fea- tures of the formation of a microrelief under the regimes of hardening and finishing hardening treat- ment were described. To remove rehardening traces on the surface layer, introduction of a geoactivat- ing material into the zone of treatment was proposed.",
keywords = "Carbon steel, Geoactivating material, Three-dimensional contactless profilometer, Ultrasonic finishing treatment",
author = "Kovalevskaya, {Zh G.} and Uvarkin, {P. V.} and Tolmachev, {A. I.}",
year = "2012",
month = "3",
day = "1",
doi = "10.1134/S1061830912030047",
language = "English",
volume = "48",
pages = "153--158",
journal = "Russian Journal of Nondestructive Testing",
issn = "1061-8309",
publisher = "Maik Nauka-Interperiodica Publishing",
number = "3",

}

TY - JOUR

T1 - Some features of the formation of the surface microrelief of steel under ultrasonic finishing treatment

AU - Kovalevskaya, Zh G.

AU - Uvarkin, P. V.

AU - Tolmachev, A. I.

PY - 2012/3/1

Y1 - 2012/3/1

N2 - The surface microrelief of carbon steel after ultrasonic finishing treatment was studied using a Micro Measure 3D Station three-dimensional contactless profilometer. The effect of the parameters of the initial surface on the microrelief of the obtained surface was considered. Some fea- tures of the formation of a microrelief under the regimes of hardening and finishing hardening treat- ment were described. To remove rehardening traces on the surface layer, introduction of a geoactivat- ing material into the zone of treatment was proposed.

AB - The surface microrelief of carbon steel after ultrasonic finishing treatment was studied using a Micro Measure 3D Station three-dimensional contactless profilometer. The effect of the parameters of the initial surface on the microrelief of the obtained surface was considered. Some fea- tures of the formation of a microrelief under the regimes of hardening and finishing hardening treat- ment were described. To remove rehardening traces on the surface layer, introduction of a geoactivat- ing material into the zone of treatment was proposed.

KW - Carbon steel

KW - Geoactivating material

KW - Three-dimensional contactless profilometer

KW - Ultrasonic finishing treatment

UR - http://www.scopus.com/inward/record.url?scp=84863644878&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84863644878&partnerID=8YFLogxK

U2 - 10.1134/S1061830912030047

DO - 10.1134/S1061830912030047

M3 - Article

VL - 48

SP - 153

EP - 158

JO - Russian Journal of Nondestructive Testing

JF - Russian Journal of Nondestructive Testing

SN - 1061-8309

IS - 3

ER -