Simulation of wind influence on the thermal processes in gas-shielded welding

D. A. Chinakhov, A. V. Vorobyev, Yu M. Gotovshchik

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Abstract

A set of various factors and phenomena defines the quality of welded joints. This is especially noticeable for outdoor welding. A numerical simulation of welding processes with consumable electrode with traditional and two-jet gas shielding was carried out to study the influence of wind speed on the movement of the shielding gas (CO2) and the change of thermal processes in the heat affected zone. It is established that the use of two-jet shielding in welding with a consumable electrode leads to an increase in hardness of the shielding gas stream and lower offset of thermal fields in the welded product in the wind direction. It testifies to a better quality of shielding and smaller probable changes in symmetry of structure formation and mechanical properties of the heat affected zone.

Original languageEnglish
Title of host publicationApplied Mechanics and Materials
PublisherTrans Tech Publications Ltd
Pages91-95
Number of pages5
Volume682
ISBN (Print)9783038352815
DOIs
Publication statusPublished - 2014
Event5th International Scientific Practical Conference on Innovative Technologies and Economics in Engineering, 2014 - Yurga, Russian Federation
Duration: 22 May 201423 May 2014

Publication series

NameApplied Mechanics and Materials
Volume682
ISSN (Print)16609336
ISSN (Electronic)16627482

Other

Other5th International Scientific Practical Conference on Innovative Technologies and Economics in Engineering, 2014
CountryRussian Federation
CityYurga
Period22.5.1423.5.14

Fingerprint

Gas welding
Shielding
Welding
Heat affected zone
Gases
Electrodes
Welds
Hardness
Hot Temperature
Mechanical properties
Computer simulation

Keywords

  • Shielding gas
  • Simulation
  • Thermal fields
  • Welding

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Chinakhov, D. A., Vorobyev, A. V., & Gotovshchik, Y. M. (2014). Simulation of wind influence on the thermal processes in gas-shielded welding. In Applied Mechanics and Materials (Vol. 682, pp. 91-95). (Applied Mechanics and Materials; Vol. 682). Trans Tech Publications Ltd. https://doi.org/10.4028/www.scientific.net/AMM.682.91

Simulation of wind influence on the thermal processes in gas-shielded welding. / Chinakhov, D. A.; Vorobyev, A. V.; Gotovshchik, Yu M.

Applied Mechanics and Materials. Vol. 682 Trans Tech Publications Ltd, 2014. p. 91-95 (Applied Mechanics and Materials; Vol. 682).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Chinakhov, DA, Vorobyev, AV & Gotovshchik, YM 2014, Simulation of wind influence on the thermal processes in gas-shielded welding. in Applied Mechanics and Materials. vol. 682, Applied Mechanics and Materials, vol. 682, Trans Tech Publications Ltd, pp. 91-95, 5th International Scientific Practical Conference on Innovative Technologies and Economics in Engineering, 2014, Yurga, Russian Federation, 22.5.14. https://doi.org/10.4028/www.scientific.net/AMM.682.91
Chinakhov DA, Vorobyev AV, Gotovshchik YM. Simulation of wind influence on the thermal processes in gas-shielded welding. In Applied Mechanics and Materials. Vol. 682. Trans Tech Publications Ltd. 2014. p. 91-95. (Applied Mechanics and Materials). https://doi.org/10.4028/www.scientific.net/AMM.682.91
Chinakhov, D. A. ; Vorobyev, A. V. ; Gotovshchik, Yu M. / Simulation of wind influence on the thermal processes in gas-shielded welding. Applied Mechanics and Materials. Vol. 682 Trans Tech Publications Ltd, 2014. pp. 91-95 (Applied Mechanics and Materials).
@inproceedings{b6e52faaa08f4e4c9b8c21e6fe05edad,
title = "Simulation of wind influence on the thermal processes in gas-shielded welding",
abstract = "A set of various factors and phenomena defines the quality of welded joints. This is especially noticeable for outdoor welding. A numerical simulation of welding processes with consumable electrode with traditional and two-jet gas shielding was carried out to study the influence of wind speed on the movement of the shielding gas (CO2) and the change of thermal processes in the heat affected zone. It is established that the use of two-jet shielding in welding with a consumable electrode leads to an increase in hardness of the shielding gas stream and lower offset of thermal fields in the welded product in the wind direction. It testifies to a better quality of shielding and smaller probable changes in symmetry of structure formation and mechanical properties of the heat affected zone.",
keywords = "Shielding gas, Simulation, Thermal fields, Welding",
author = "Chinakhov, {D. A.} and Vorobyev, {A. V.} and Gotovshchik, {Yu M.}",
year = "2014",
doi = "10.4028/www.scientific.net/AMM.682.91",
language = "English",
isbn = "9783038352815",
volume = "682",
series = "Applied Mechanics and Materials",
publisher = "Trans Tech Publications Ltd",
pages = "91--95",
booktitle = "Applied Mechanics and Materials",

}

TY - GEN

T1 - Simulation of wind influence on the thermal processes in gas-shielded welding

AU - Chinakhov, D. A.

AU - Vorobyev, A. V.

AU - Gotovshchik, Yu M.

PY - 2014

Y1 - 2014

N2 - A set of various factors and phenomena defines the quality of welded joints. This is especially noticeable for outdoor welding. A numerical simulation of welding processes with consumable electrode with traditional and two-jet gas shielding was carried out to study the influence of wind speed on the movement of the shielding gas (CO2) and the change of thermal processes in the heat affected zone. It is established that the use of two-jet shielding in welding with a consumable electrode leads to an increase in hardness of the shielding gas stream and lower offset of thermal fields in the welded product in the wind direction. It testifies to a better quality of shielding and smaller probable changes in symmetry of structure formation and mechanical properties of the heat affected zone.

AB - A set of various factors and phenomena defines the quality of welded joints. This is especially noticeable for outdoor welding. A numerical simulation of welding processes with consumable electrode with traditional and two-jet gas shielding was carried out to study the influence of wind speed on the movement of the shielding gas (CO2) and the change of thermal processes in the heat affected zone. It is established that the use of two-jet shielding in welding with a consumable electrode leads to an increase in hardness of the shielding gas stream and lower offset of thermal fields in the welded product in the wind direction. It testifies to a better quality of shielding and smaller probable changes in symmetry of structure formation and mechanical properties of the heat affected zone.

KW - Shielding gas

KW - Simulation

KW - Thermal fields

KW - Welding

UR - http://www.scopus.com/inward/record.url?scp=84921833200&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84921833200&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/AMM.682.91

DO - 10.4028/www.scientific.net/AMM.682.91

M3 - Conference contribution

AN - SCOPUS:84921833200

SN - 9783038352815

VL - 682

T3 - Applied Mechanics and Materials

SP - 91

EP - 95

BT - Applied Mechanics and Materials

PB - Trans Tech Publications Ltd

ER -