Abstract
Diagnosing processing system conditions is a key area in automation of modern machinery production. The article presents the results of a preliminary experimental research of the boring process using conventional and skiving cutters under the conditions of the low stiffness processing system. Acoustic emission and vibration sensors are used for cutting process diagnosis. Surface roughness after machining is determined using a laser scanning microscope. As a result, it is found that the use of skiving cutters provides greater stability of the cutting process and lower surface roughness as compared with conventional cutters.
| Original language | English |
|---|---|
| Article number | 012139 |
| Journal | Journal of Physics: Conference Series |
| Volume | 803 |
| Issue number | 1 |
| DOIs | |
| Publication status | Published - 2017 |
Fingerprint
ASJC Scopus subject areas
- Physics and Astronomy(all)
Cite this
Sensors of vibration and acoustic emission for monitoring of boring with skiving cutters. / Shamarin, N. N.; Filippov, A. V.; Podgornyh, O. A.; Filippova, E. O.
In: Journal of Physics: Conference Series, Vol. 803, No. 1, 012139, 2017.Research output: Contribution to journal › Article
}
TY - JOUR
T1 - Sensors of vibration and acoustic emission for monitoring of boring with skiving cutters
AU - Shamarin, N. N.
AU - Filippov, A. V.
AU - Podgornyh, O. A.
AU - Filippova, E. O.
PY - 2017
Y1 - 2017
N2 - Diagnosing processing system conditions is a key area in automation of modern machinery production. The article presents the results of a preliminary experimental research of the boring process using conventional and skiving cutters under the conditions of the low stiffness processing system. Acoustic emission and vibration sensors are used for cutting process diagnosis. Surface roughness after machining is determined using a laser scanning microscope. As a result, it is found that the use of skiving cutters provides greater stability of the cutting process and lower surface roughness as compared with conventional cutters.
AB - Diagnosing processing system conditions is a key area in automation of modern machinery production. The article presents the results of a preliminary experimental research of the boring process using conventional and skiving cutters under the conditions of the low stiffness processing system. Acoustic emission and vibration sensors are used for cutting process diagnosis. Surface roughness after machining is determined using a laser scanning microscope. As a result, it is found that the use of skiving cutters provides greater stability of the cutting process and lower surface roughness as compared with conventional cutters.
UR - http://www.scopus.com/inward/record.url?scp=85018345761&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=85018345761&partnerID=8YFLogxK
U2 - 10.1088/1742-6596/803/1/012139
DO - 10.1088/1742-6596/803/1/012139
M3 - Article
AN - SCOPUS:85018345761
VL - 803
JO - Journal of Physics: Conference Series
JF - Journal of Physics: Conference Series
SN - 1742-6588
IS - 1
M1 - 012139
ER -