Abstract
The development of resonant microwave compressors that can be tuned in the working frequency band comparable with the band of a single-mode waveguide is theoretically analyzed. The variants of the multifrequency (broadband) compressors with (i) a 3D storage cavity and an energy-output element based on the waveguide tee and (ii) a symmetric storage system and an energy-input-output element based on the magic tee are considered. The conditions for the creation and the possible characteristics of microwave compressors with discrete sets of working frequencies and quasi-continuous and continuous frequency bands are determined. The prototypes of tunable microwave compressors of the 3-cm-wavelength range are experimentally studied.
Original language | English |
---|---|
Pages (from-to) | 721-732 |
Number of pages | 12 |
Journal | Journal of Communications Technology and Electronics |
Volume | 54 |
Issue number | 6 |
DOIs | |
Publication status | Published - 1 Jun 2009 |
Fingerprint
ASJC Scopus subject areas
- Electrical and Electronic Engineering
- Condensed Matter Physics
- Radiation
- Electronic, Optical and Magnetic Materials
Cite this
Resonant frequency-tunable microwave compressors. / Avgustinovich, V. A.; Artemenko, S. N.; Shlapakovskii, A. S.
In: Journal of Communications Technology and Electronics, Vol. 54, No. 6, 01.06.2009, p. 721-732.Research output: Contribution to journal › Article
}
TY - JOUR
T1 - Resonant frequency-tunable microwave compressors
AU - Avgustinovich, V. A.
AU - Artemenko, S. N.
AU - Shlapakovskii, A. S.
PY - 2009/6/1
Y1 - 2009/6/1
N2 - The development of resonant microwave compressors that can be tuned in the working frequency band comparable with the band of a single-mode waveguide is theoretically analyzed. The variants of the multifrequency (broadband) compressors with (i) a 3D storage cavity and an energy-output element based on the waveguide tee and (ii) a symmetric storage system and an energy-input-output element based on the magic tee are considered. The conditions for the creation and the possible characteristics of microwave compressors with discrete sets of working frequencies and quasi-continuous and continuous frequency bands are determined. The prototypes of tunable microwave compressors of the 3-cm-wavelength range are experimentally studied.
AB - The development of resonant microwave compressors that can be tuned in the working frequency band comparable with the band of a single-mode waveguide is theoretically analyzed. The variants of the multifrequency (broadband) compressors with (i) a 3D storage cavity and an energy-output element based on the waveguide tee and (ii) a symmetric storage system and an energy-input-output element based on the magic tee are considered. The conditions for the creation and the possible characteristics of microwave compressors with discrete sets of working frequencies and quasi-continuous and continuous frequency bands are determined. The prototypes of tunable microwave compressors of the 3-cm-wavelength range are experimentally studied.
UR - http://www.scopus.com/inward/record.url?scp=67650273297&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=67650273297&partnerID=8YFLogxK
U2 - 10.1134/S1064226909060163
DO - 10.1134/S1064226909060163
M3 - Article
AN - SCOPUS:67650273297
VL - 54
SP - 721
EP - 732
JO - Journal of Communications Technology and Electronics
JF - Journal of Communications Technology and Electronics
SN - 1064-2269
IS - 6
ER -