Research on the high quality replacement carbide plates operability with Al-Si-N hardening coating

D. S. Rechenko, B. P. Gritsenko, A. Yu Popov, D. G. Balova

Research output: Contribution to journalConference articlepeer-review

1 Citation (Scopus)

Abstract

Quality requirements for the manufacturing parts made of hard-to-machine materials with cutting tools are quite high. At the same time, modern carbide cutting tools are not always able to maintain working capacity throughout the entire mechanical operation, providing these requirements. The article considers test results of replaceable carbide plates during finish processing of a heat resistant alloy. Carbide plates were sharpened with ultra high speed grinding, and then hardened with Al-Si-N coating, which made it possible to obtain tool blade sharpness ρ = 3...5 μm and to achieve resistance several times higher compared to a similar tool.

Original languageEnglish
Article number012067
JournalJournal of Physics: Conference Series
Volume1050
Issue number1
DOIs
Publication statusPublished - 26 Jul 2018
Externally publishedYes
EventMechanical Science and Technology Update 2018, MSTU 2018 - Omsk, Russian Federation
Duration: 27 Feb 201828 Feb 2018

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Fingerprint Dive into the research topics of 'Research on the high quality replacement carbide plates operability with Al-Si-N hardening coating'. Together they form a unique fingerprint.

Cite this