Research of surface activating influence on formation of adhesion between gas-thermal coating and steel substrate

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Abstract

Estimation of influence of physical and thermal activating on adhesion between steel substrates and thermal coatings has been performed. The substrates with surfaces obtained by and ultrasonic surface plastic deformation were used. To evaluate physical activating, preheating of the substrates to 600°C was performed. To evaluate the effect of thermal activating, the substrate surfaces after interfacial detachment were examined. Bonded areas on the substrate surfaces were measured by means of optical profilometry. The experiments have shown that surface physical activating is the main factor in formation of the adhesive bond between the coating and the substrate processed with the proposed methods.

Original languageEnglish
Title of host publicationIOP Conference Series: Materials Science and Engineering
PublisherInstitute of Physics Publishing
Volume91
Edition1
DOIs
Publication statusPublished - 14 Sep 2015
Event6th International Scientific Practical Conference on Innovative Technologies and Economics in Engineering - Yurga, Russian Federation
Duration: 21 May 201523 May 2015

Other

Other6th International Scientific Practical Conference on Innovative Technologies and Economics in Engineering
CountryRussian Federation
CityYurga
Period21.5.1523.5.15

    Fingerprint

ASJC Scopus subject areas

  • Engineering(all)
  • Materials Science(all)

Cite this

Kovalevskaya, Z., Klimenov, V., & Zaitsev, K. V. (2015). Research of surface activating influence on formation of adhesion between gas-thermal coating and steel substrate. In IOP Conference Series: Materials Science and Engineering (1 ed., Vol. 91). [012057] Institute of Physics Publishing. https://doi.org/10.1088/1757-899X/91/1/012057