Repetitive linear induction accelerators for high-current electron devices

I. I. Vintizenko, E. G. Fourman

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

We present two different versions of linear induction accelerators (LIAs) operating in the repetitive mode. The common elements in these versions are the induction system assembled of identical cores with one-turn winding on each core and strip forming lines placed around the induction system. These elements are installed within the cylinder tank of the same radial size for both versions. The traditional scheme of the LIA includes the multi-channel spark gap connected to the LIA unit that discharges the forming lines through the induction system resulting in electron beam generation. Such version of the LIA is more compact, lighter and cheaper. The parameters of electron beams are: beam current 12 kA, voltage 400 kV, repetition rate frequency-up to 50 Hz. The dimensions of the described LIA section are 700 mm diameter and 900 mm length at the weight of 800 kg. The other scheme of the LIA includes the magnetic pulse generator and magnetic switch for the strip line charging and commutation. In comparison with the traditional scheme of the LIA, this one provides higher rep-rate frequencies. The parameters of electron beams are: beam current 6 kA, voltage 400 kV, repetition rate frequency continuously 50 Hz, repetitively 400 Hz, in bursts mode up to 3,3 kHz. The dimensions of the LIA with magnetic elements are 700 mm diameter and 1900 mm length at the weight of 1800 kg. This LIA allows changing the output voltage pulse polarity for 15 minutes without drainage of transformer oil. Electrons kinetic energy can be increased by means of employing 2-6 accelerating modules.

Original languageEnglish
Title of host publicationIEEE International Conference on Plasma Science
Publication statusPublished - 2001
Event28th IEEE International Conference on Plasma Science/ 13th IEEE International Pulsed Power Conference - Las Vegas, NV, United States
Duration: 17 Jun 200122 Jun 2001

Other

Other28th IEEE International Conference on Plasma Science/ 13th IEEE International Pulsed Power Conference
CountryUnited States
CityLas Vegas, NV
Period17.6.0122.6.01

Fingerprint

high current
induction
accelerators
intake systems
electrons
electron beams
beam currents
repetition
strip
electric potential
spark gaps
pulse generators
commutation
drainage
transformers
charging
bursts
polarity
switches
modules

ASJC Scopus subject areas

  • Condensed Matter Physics

Cite this

Vintizenko, I. I., & Fourman, E. G. (2001). Repetitive linear induction accelerators for high-current electron devices. In IEEE International Conference on Plasma Science

Repetitive linear induction accelerators for high-current electron devices. / Vintizenko, I. I.; Fourman, E. G.

IEEE International Conference on Plasma Science. 2001.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Vintizenko, II & Fourman, EG 2001, Repetitive linear induction accelerators for high-current electron devices. in IEEE International Conference on Plasma Science. 28th IEEE International Conference on Plasma Science/ 13th IEEE International Pulsed Power Conference, Las Vegas, NV, United States, 17.6.01.
Vintizenko II, Fourman EG. Repetitive linear induction accelerators for high-current electron devices. In IEEE International Conference on Plasma Science. 2001
Vintizenko, I. I. ; Fourman, E. G. / Repetitive linear induction accelerators for high-current electron devices. IEEE International Conference on Plasma Science. 2001.
@inproceedings{890773f334f54cf6ae4ed514428762c3,
title = "Repetitive linear induction accelerators for high-current electron devices",
abstract = "We present two different versions of linear induction accelerators (LIAs) operating in the repetitive mode. The common elements in these versions are the induction system assembled of identical cores with one-turn winding on each core and strip forming lines placed around the induction system. These elements are installed within the cylinder tank of the same radial size for both versions. The traditional scheme of the LIA includes the multi-channel spark gap connected to the LIA unit that discharges the forming lines through the induction system resulting in electron beam generation. Such version of the LIA is more compact, lighter and cheaper. The parameters of electron beams are: beam current 12 kA, voltage 400 kV, repetition rate frequency-up to 50 Hz. The dimensions of the described LIA section are 700 mm diameter and 900 mm length at the weight of 800 kg. The other scheme of the LIA includes the magnetic pulse generator and magnetic switch for the strip line charging and commutation. In comparison with the traditional scheme of the LIA, this one provides higher rep-rate frequencies. The parameters of electron beams are: beam current 6 kA, voltage 400 kV, repetition rate frequency continuously 50 Hz, repetitively 400 Hz, in bursts mode up to 3,3 kHz. The dimensions of the LIA with magnetic elements are 700 mm diameter and 1900 mm length at the weight of 1800 kg. This LIA allows changing the output voltage pulse polarity for 15 minutes without drainage of transformer oil. Electrons kinetic energy can be increased by means of employing 2-6 accelerating modules.",
author = "Vintizenko, {I. I.} and Fourman, {E. G.}",
year = "2001",
language = "English",
booktitle = "IEEE International Conference on Plasma Science",

}

TY - GEN

T1 - Repetitive linear induction accelerators for high-current electron devices

AU - Vintizenko, I. I.

AU - Fourman, E. G.

PY - 2001

Y1 - 2001

N2 - We present two different versions of linear induction accelerators (LIAs) operating in the repetitive mode. The common elements in these versions are the induction system assembled of identical cores with one-turn winding on each core and strip forming lines placed around the induction system. These elements are installed within the cylinder tank of the same radial size for both versions. The traditional scheme of the LIA includes the multi-channel spark gap connected to the LIA unit that discharges the forming lines through the induction system resulting in electron beam generation. Such version of the LIA is more compact, lighter and cheaper. The parameters of electron beams are: beam current 12 kA, voltage 400 kV, repetition rate frequency-up to 50 Hz. The dimensions of the described LIA section are 700 mm diameter and 900 mm length at the weight of 800 kg. The other scheme of the LIA includes the magnetic pulse generator and magnetic switch for the strip line charging and commutation. In comparison with the traditional scheme of the LIA, this one provides higher rep-rate frequencies. The parameters of electron beams are: beam current 6 kA, voltage 400 kV, repetition rate frequency continuously 50 Hz, repetitively 400 Hz, in bursts mode up to 3,3 kHz. The dimensions of the LIA with magnetic elements are 700 mm diameter and 1900 mm length at the weight of 1800 kg. This LIA allows changing the output voltage pulse polarity for 15 minutes without drainage of transformer oil. Electrons kinetic energy can be increased by means of employing 2-6 accelerating modules.

AB - We present two different versions of linear induction accelerators (LIAs) operating in the repetitive mode. The common elements in these versions are the induction system assembled of identical cores with one-turn winding on each core and strip forming lines placed around the induction system. These elements are installed within the cylinder tank of the same radial size for both versions. The traditional scheme of the LIA includes the multi-channel spark gap connected to the LIA unit that discharges the forming lines through the induction system resulting in electron beam generation. Such version of the LIA is more compact, lighter and cheaper. The parameters of electron beams are: beam current 12 kA, voltage 400 kV, repetition rate frequency-up to 50 Hz. The dimensions of the described LIA section are 700 mm diameter and 900 mm length at the weight of 800 kg. The other scheme of the LIA includes the magnetic pulse generator and magnetic switch for the strip line charging and commutation. In comparison with the traditional scheme of the LIA, this one provides higher rep-rate frequencies. The parameters of electron beams are: beam current 6 kA, voltage 400 kV, repetition rate frequency continuously 50 Hz, repetitively 400 Hz, in bursts mode up to 3,3 kHz. The dimensions of the LIA with magnetic elements are 700 mm diameter and 1900 mm length at the weight of 1800 kg. This LIA allows changing the output voltage pulse polarity for 15 minutes without drainage of transformer oil. Electrons kinetic energy can be increased by means of employing 2-6 accelerating modules.

UR - http://www.scopus.com/inward/record.url?scp=0035180643&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0035180643&partnerID=8YFLogxK

M3 - Conference contribution

BT - IEEE International Conference on Plasma Science

ER -