Reduction of re-entrainment in an electrostatic precipitator by installation of shaped elements

A. G. Titov, Z. R. Gil’Vanova, N. V. Inyushkin, A. A. Bir, M. K. Masnaviev, E. A. Shevchenko, P. A. Dergachev, V. V. Korobochkin

    Research output: Contribution to journalArticle

    2 Citations (Scopus)

    Abstract

    It is proposed to install profiled C-shape elements on the receiving electrodes to reduce re-entrainment in an electrostatic tube-in-tube precipitator. Experiment planning is performed to evaluate the influence exerted by the configuration of the shaped elements on the efficiency of the precipitator. Its operating efficiency can be increased by 2-15%.

    Original languageEnglish
    Article numberA003
    Pages (from-to)77-83
    Number of pages7
    JournalChemical and Petroleum Engineering
    Volume51
    Issue number1
    DOIs
    Publication statusPublished - 28 May 2015

    Keywords

    • Electrostatic precipitator
    • Profiled elements
    • Re-entrainment

    ASJC Scopus subject areas

    • Chemical Engineering(all)
    • Energy Engineering and Power Technology
    • Fuel Technology
    • Geochemistry and Petrology

    Fingerprint Dive into the research topics of 'Reduction of re-entrainment in an electrostatic precipitator by installation of shaped elements'. Together they form a unique fingerprint.

  • Cite this

    Titov, A. G., Gil’Vanova, Z. R., Inyushkin, N. V., Bir, A. A., Masnaviev, M. K., Shevchenko, E. A., Dergachev, P. A., & Korobochkin, V. V. (2015). Reduction of re-entrainment in an electrostatic precipitator by installation of shaped elements. Chemical and Petroleum Engineering, 51(1), 77-83. [A003]. https://doi.org/10.1007/s10556-015-0003-6