Quality of metal deposited flux cored wire with the system Fe-C-Si-Mn-Cr-Mo-Ni-V-Co

A. I. Gusev, N. A. Kozyrev, I. V. Osetkovskiy, O. A. Kozyreva, D. V. Valuev

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)


Studied the effect of the introduction of vanadium and cobalt into the charge powder fused wire system Fe-C-Si-Mn-Cr-Ni-Mo-V, used in cladding assemblies and equipment parts and mechanisms operating under abrasive and abrasive shock loads. the cored wires samples were manufactured in the laboratory conditions and using appropriate powder materials and as a carbonfluoride contained material were used the dust from gas purification of aluminum production.

Original languageEnglish
Title of host publicationMaterials and their Application - ICMA 2016
EditorsNikita V. Martyushev, Denis V. Valuev
PublisherTrans Tech Publications Ltd
Number of pages6
ISBN (Print)9783035711790
Publication statusPublished - 1 Jan 2017
EventInternational Conference on Materials and their Application, ICMA 2016 - Yurga, Russian Federation
Duration: 15 Dec 201616 Dec 2016

Publication series

NameKey Engineering Materials
Volume736 KEM
ISSN (Print)1013-9826


ConferenceInternational Conference on Materials and their Application, ICMA 2016
CountryRussian Federation



  • Cored wire
  • Flux
  • Hardness
  • Microstructure
  • Multivariate analysis
  • Slag
  • Surfacing
  • Wear resistance
  • Welding

ASJC Scopus subject areas

  • Materials Science(all)
  • Mechanics of Materials
  • Mechanical Engineering

Cite this

Gusev, A. I., Kozyrev, N. A., Osetkovskiy, I. V., Kozyreva, O. A., & Valuev, D. V. (2017). Quality of metal deposited flux cored wire with the system Fe-C-Si-Mn-Cr-Mo-Ni-V-Co. In N. V. Martyushev, & D. V. Valuev (Eds.), Materials and their Application - ICMA 2016 (pp. 23-28). (Key Engineering Materials; Vol. 736 KEM). Trans Tech Publications Ltd. https://doi.org/10.4028/www.scientific.net/KEM.736.23