Properties of copper and molybdenum sulfide powders produced by self-propagating high-temperature synthesis

Farabi Bozheyev, Vladimir An, Yuri Irtegov

Research output: Chapter in Book/Report/Conference proceedingConference contribution

9 Citations (Scopus)

Abstract

Copper and molybdenum sulfide nanopowders were prepared by self-propagating hightemperature synthesis in argon. The initial copper powder and molybdenum powder were produced by electric spark dispersion in hexane and by electrical explosion of wires (EEW) in argon, respectively. The powders were studied by electron microscopy, X-ray diffraction and Raman spectroscopy. The copper sulfide main phase is hexagonal 2H-CuS, whereas hexagonal 2H-MoS2 and rhombohedral 3R-MoS2 are characteristic for molybdenum disulfide. The lattice parameters of copper and molybdenum sulfides were calculated. The average particle size of copper sulfide and molybdenum disulfide powders was about 50 nm and 80 nm, respectively.

Original languageEnglish
Title of host publicationAdvanced Materials Research
Pages191-196
Number of pages6
Volume872
DOIs
Publication statusPublished - 2014
EventRussian-German Forum on Nanotechnology - Tomsk, Russian Federation
Duration: 21 May 201324 May 2013

Publication series

NameAdvanced Materials Research
Volume872
ISSN (Print)10226680

Other

OtherRussian-German Forum on Nanotechnology
CountryRussian Federation
CityTomsk
Period21.5.1324.5.13

Fingerprint

Molybdenum
Copper
Powders
Argon
Temperature
Copper powder
Hexane
Electric sparks
Electron microscopy
Lattice constants
Explosions
Raman spectroscopy
Particle size
Sulfides
Wire
X ray diffraction

Keywords

  • Copper sulfide
  • Molybdenum disulfide
  • Nanopowder

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Bozheyev, F., An, V., & Irtegov, Y. (2014). Properties of copper and molybdenum sulfide powders produced by self-propagating high-temperature synthesis. In Advanced Materials Research (Vol. 872, pp. 191-196). (Advanced Materials Research; Vol. 872). https://doi.org/10.4028/www.scientific.net/AMR.872.191

Properties of copper and molybdenum sulfide powders produced by self-propagating high-temperature synthesis. / Bozheyev, Farabi; An, Vladimir; Irtegov, Yuri.

Advanced Materials Research. Vol. 872 2014. p. 191-196 (Advanced Materials Research; Vol. 872).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bozheyev, F, An, V & Irtegov, Y 2014, Properties of copper and molybdenum sulfide powders produced by self-propagating high-temperature synthesis. in Advanced Materials Research. vol. 872, Advanced Materials Research, vol. 872, pp. 191-196, Russian-German Forum on Nanotechnology, Tomsk, Russian Federation, 21.5.13. https://doi.org/10.4028/www.scientific.net/AMR.872.191
Bozheyev F, An V, Irtegov Y. Properties of copper and molybdenum sulfide powders produced by self-propagating high-temperature synthesis. In Advanced Materials Research. Vol. 872. 2014. p. 191-196. (Advanced Materials Research). https://doi.org/10.4028/www.scientific.net/AMR.872.191
Bozheyev, Farabi ; An, Vladimir ; Irtegov, Yuri. / Properties of copper and molybdenum sulfide powders produced by self-propagating high-temperature synthesis. Advanced Materials Research. Vol. 872 2014. pp. 191-196 (Advanced Materials Research).
@inproceedings{c51c52fc2e6b4fb8928306267048ad9e,
title = "Properties of copper and molybdenum sulfide powders produced by self-propagating high-temperature synthesis",
abstract = "Copper and molybdenum sulfide nanopowders were prepared by self-propagating hightemperature synthesis in argon. The initial copper powder and molybdenum powder were produced by electric spark dispersion in hexane and by electrical explosion of wires (EEW) in argon, respectively. The powders were studied by electron microscopy, X-ray diffraction and Raman spectroscopy. The copper sulfide main phase is hexagonal 2H-CuS, whereas hexagonal 2H-MoS2 and rhombohedral 3R-MoS2 are characteristic for molybdenum disulfide. The lattice parameters of copper and molybdenum sulfides were calculated. The average particle size of copper sulfide and molybdenum disulfide powders was about 50 nm and 80 nm, respectively.",
keywords = "Copper sulfide, Molybdenum disulfide, Nanopowder",
author = "Farabi Bozheyev and Vladimir An and Yuri Irtegov",
year = "2014",
doi = "10.4028/www.scientific.net/AMR.872.191",
language = "English",
isbn = "9783037859667",
volume = "872",
series = "Advanced Materials Research",
pages = "191--196",
booktitle = "Advanced Materials Research",

}

TY - GEN

T1 - Properties of copper and molybdenum sulfide powders produced by self-propagating high-temperature synthesis

AU - Bozheyev, Farabi

AU - An, Vladimir

AU - Irtegov, Yuri

PY - 2014

Y1 - 2014

N2 - Copper and molybdenum sulfide nanopowders were prepared by self-propagating hightemperature synthesis in argon. The initial copper powder and molybdenum powder were produced by electric spark dispersion in hexane and by electrical explosion of wires (EEW) in argon, respectively. The powders were studied by electron microscopy, X-ray diffraction and Raman spectroscopy. The copper sulfide main phase is hexagonal 2H-CuS, whereas hexagonal 2H-MoS2 and rhombohedral 3R-MoS2 are characteristic for molybdenum disulfide. The lattice parameters of copper and molybdenum sulfides were calculated. The average particle size of copper sulfide and molybdenum disulfide powders was about 50 nm and 80 nm, respectively.

AB - Copper and molybdenum sulfide nanopowders were prepared by self-propagating hightemperature synthesis in argon. The initial copper powder and molybdenum powder were produced by electric spark dispersion in hexane and by electrical explosion of wires (EEW) in argon, respectively. The powders were studied by electron microscopy, X-ray diffraction and Raman spectroscopy. The copper sulfide main phase is hexagonal 2H-CuS, whereas hexagonal 2H-MoS2 and rhombohedral 3R-MoS2 are characteristic for molybdenum disulfide. The lattice parameters of copper and molybdenum sulfides were calculated. The average particle size of copper sulfide and molybdenum disulfide powders was about 50 nm and 80 nm, respectively.

KW - Copper sulfide

KW - Molybdenum disulfide

KW - Nanopowder

UR - http://www.scopus.com/inward/record.url?scp=84891900129&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84891900129&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/AMR.872.191

DO - 10.4028/www.scientific.net/AMR.872.191

M3 - Conference contribution

AN - SCOPUS:84891900129

SN - 9783037859667

VL - 872

T3 - Advanced Materials Research

SP - 191

EP - 196

BT - Advanced Materials Research

ER -