Production of sio 2-p 2o 5-c ao-(n a2o) structured films

T. S. Petrovskaya, L. P. Borilo

Research output: Contribution to journalArticle

Abstract

Here and below, content by weight, unless stipulated otherwise. The sol-gel method is used to obtain from film-forming solutions, based on solutions of tetra-ethyl-ortho-silicate and phosphoric acid with addition of calcium and sodium salts, thin structured films in the systems SiO 2-P 2 O 5-C aO-(Na 2 O) with the following content by weight (wt.%): 10-85 SiO 2 , 5-40 P 2 O 5 , 10-50 C aO and 10 Na 2 O. The physical-chemical processes in solutions giving rise to a transition of the true solutions into colloidal solutions via successive sol and gel states are studied. A criterion is established for the film-forming power: the viscosity of the solutions. The critical value of the viscosity for obtaining high-quality films is determined. Oxide systems form in films during kilning to temperature 600°C. The structure of the films is investigated by means of infrared spectroscopy, atomic-force microscopy, and x-ray phase analysis. The surface of the films is characterized by an extended relief and porosity, so that it should have high adhesion properties. The thickness of the films obtained does not exceed 90 nm.

Original languageEnglish
Pages (from-to)25-29
Number of pages5
JournalGlass and Ceramics (English translation of Steklo i Keramika)
Volume69
Issue number1-2
Publication statusPublished - May 2012

Fingerprint

Viscosity
Silicates
Phosphoric acid
Polymethyl Methacrylate
Sols
Oxides
Sol-gel process
Infrared spectroscopy
Calcium
Atomic force microscopy
Adhesion
Gels
Salts
Porosity
Sodium
X rays
Temperature
phosphoric acid

Keywords

  • Film-forming solution
  • Silicophosphate materials
  • Sol-gel method

ASJC Scopus subject areas

  • Ceramics and Composites
  • Materials Chemistry
  • Mechanics of Materials

Cite this

Production of sio 2-p 2o 5-c ao-(n a2o) structured films. / Petrovskaya, T. S.; Borilo, L. P.

In: Glass and Ceramics (English translation of Steklo i Keramika), Vol. 69, No. 1-2, 05.2012, p. 25-29.

Research output: Contribution to journalArticle

@article{8ddff07834a7430f9537455b7c5fedbf,
title = "Production of sio 2-p 2o 5-c ao-(n a2o) structured films",
abstract = "Here and below, content by weight, unless stipulated otherwise. The sol-gel method is used to obtain from film-forming solutions, based on solutions of tetra-ethyl-ortho-silicate and phosphoric acid with addition of calcium and sodium salts, thin structured films in the systems SiO 2-P 2 O 5-C aO-(Na 2 O) with the following content by weight (wt.{\%}): 10-85 SiO 2 , 5-40 P 2 O 5 , 10-50 C aO and 10 Na 2 O. The physical-chemical processes in solutions giving rise to a transition of the true solutions into colloidal solutions via successive sol and gel states are studied. A criterion is established for the film-forming power: the viscosity of the solutions. The critical value of the viscosity for obtaining high-quality films is determined. Oxide systems form in films during kilning to temperature 600°C. The structure of the films is investigated by means of infrared spectroscopy, atomic-force microscopy, and x-ray phase analysis. The surface of the films is characterized by an extended relief and porosity, so that it should have high adhesion properties. The thickness of the films obtained does not exceed 90 nm.",
keywords = "Film-forming solution, Silicophosphate materials, Sol-gel method",
author = "Petrovskaya, {T. S.} and Borilo, {L. P.}",
year = "2012",
month = "5",
language = "English",
volume = "69",
pages = "25--29",
journal = "Glass and Ceramics (English translation of Steklo i Keramika)",
issn = "0361-7610",
publisher = "Springer New York",
number = "1-2",

}

TY - JOUR

T1 - Production of sio 2-p 2o 5-c ao-(n a2o) structured films

AU - Petrovskaya, T. S.

AU - Borilo, L. P.

PY - 2012/5

Y1 - 2012/5

N2 - Here and below, content by weight, unless stipulated otherwise. The sol-gel method is used to obtain from film-forming solutions, based on solutions of tetra-ethyl-ortho-silicate and phosphoric acid with addition of calcium and sodium salts, thin structured films in the systems SiO 2-P 2 O 5-C aO-(Na 2 O) with the following content by weight (wt.%): 10-85 SiO 2 , 5-40 P 2 O 5 , 10-50 C aO and 10 Na 2 O. The physical-chemical processes in solutions giving rise to a transition of the true solutions into colloidal solutions via successive sol and gel states are studied. A criterion is established for the film-forming power: the viscosity of the solutions. The critical value of the viscosity for obtaining high-quality films is determined. Oxide systems form in films during kilning to temperature 600°C. The structure of the films is investigated by means of infrared spectroscopy, atomic-force microscopy, and x-ray phase analysis. The surface of the films is characterized by an extended relief and porosity, so that it should have high adhesion properties. The thickness of the films obtained does not exceed 90 nm.

AB - Here and below, content by weight, unless stipulated otherwise. The sol-gel method is used to obtain from film-forming solutions, based on solutions of tetra-ethyl-ortho-silicate and phosphoric acid with addition of calcium and sodium salts, thin structured films in the systems SiO 2-P 2 O 5-C aO-(Na 2 O) with the following content by weight (wt.%): 10-85 SiO 2 , 5-40 P 2 O 5 , 10-50 C aO and 10 Na 2 O. The physical-chemical processes in solutions giving rise to a transition of the true solutions into colloidal solutions via successive sol and gel states are studied. A criterion is established for the film-forming power: the viscosity of the solutions. The critical value of the viscosity for obtaining high-quality films is determined. Oxide systems form in films during kilning to temperature 600°C. The structure of the films is investigated by means of infrared spectroscopy, atomic-force microscopy, and x-ray phase analysis. The surface of the films is characterized by an extended relief and porosity, so that it should have high adhesion properties. The thickness of the films obtained does not exceed 90 nm.

KW - Film-forming solution

KW - Silicophosphate materials

KW - Sol-gel method

UR - http://www.scopus.com/inward/record.url?scp=84861492390&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84861492390&partnerID=8YFLogxK

M3 - Article

VL - 69

SP - 25

EP - 29

JO - Glass and Ceramics (English translation of Steklo i Keramika)

JF - Glass and Ceramics (English translation of Steklo i Keramika)

SN - 0361-7610

IS - 1-2

ER -