Pressure Pump Power Control in the Primary Circuit of the Heat Exchange System

Aleksandr Shilin, Viktor Bukreev, Sergey Prohorov

Research output: Contribution to journalArticle

Abstract

In this paper we consider the problem of speed in hot water systems where highly efficient plate heat exchanger is used. Especially marked the problem which is connected with long transition drive of constant speed exceeding the time of the heat exchanger accumulative tank emptying more than twice. As a regulating element in the heat exchange system there was proposed to use asynchronous electric drive of pressure pump in the primary circuit of the heat exchanger. For correct use of such electric drive we solved the problem of control object mathematical model synthesis, which has non-linear properties, in particular, the transfer coefficient of the circuit can vary in more than 6 times. At the same time there was revealed the dependence of the transfer coefficient on the motor speed, which must be considered in the controller synthesis. In conclusion we suggested the solutions of regulators synthesis tasks with customizable settings for speed and switchable structure between relay λ and PI regulators.

Original languageEnglish
Article number01043
JournalMATEC Web of Conferences
Volume91
DOIs
Publication statusPublished - 20 Dec 2016

Fingerprint

Power control
Pumps
Heat exchangers
Electric drives
Networks (circuits)
Mathematical models
Controllers
Hot Temperature
Water

ASJC Scopus subject areas

  • Chemistry(all)
  • Engineering(all)
  • Materials Science(all)

Cite this

Pressure Pump Power Control in the Primary Circuit of the Heat Exchange System. / Shilin, Aleksandr; Bukreev, Viktor; Prohorov, Sergey.

In: MATEC Web of Conferences, Vol. 91, 01043, 20.12.2016.

Research output: Contribution to journalArticle

@article{f363219ff8dd4347aef0e19e6851c311,
title = "Pressure Pump Power Control in the Primary Circuit of the Heat Exchange System",
abstract = "In this paper we consider the problem of speed in hot water systems where highly efficient plate heat exchanger is used. Especially marked the problem which is connected with long transition drive of constant speed exceeding the time of the heat exchanger accumulative tank emptying more than twice. As a regulating element in the heat exchange system there was proposed to use asynchronous electric drive of pressure pump in the primary circuit of the heat exchanger. For correct use of such electric drive we solved the problem of control object mathematical model synthesis, which has non-linear properties, in particular, the transfer coefficient of the circuit can vary in more than 6 times. At the same time there was revealed the dependence of the transfer coefficient on the motor speed, which must be considered in the controller synthesis. In conclusion we suggested the solutions of regulators synthesis tasks with customizable settings for speed and switchable structure between relay λ and PI regulators.",
author = "Aleksandr Shilin and Viktor Bukreev and Sergey Prohorov",
year = "2016",
month = "12",
day = "20",
doi = "10.1051/matecconf/20179101043",
language = "English",
volume = "91",
journal = "MATEC Web of Conferences",

}

TY - JOUR

T1 - Pressure Pump Power Control in the Primary Circuit of the Heat Exchange System

AU - Shilin, Aleksandr

AU - Bukreev, Viktor

AU - Prohorov, Sergey

PY - 2016/12/20

Y1 - 2016/12/20

N2 - In this paper we consider the problem of speed in hot water systems where highly efficient plate heat exchanger is used. Especially marked the problem which is connected with long transition drive of constant speed exceeding the time of the heat exchanger accumulative tank emptying more than twice. As a regulating element in the heat exchange system there was proposed to use asynchronous electric drive of pressure pump in the primary circuit of the heat exchanger. For correct use of such electric drive we solved the problem of control object mathematical model synthesis, which has non-linear properties, in particular, the transfer coefficient of the circuit can vary in more than 6 times. At the same time there was revealed the dependence of the transfer coefficient on the motor speed, which must be considered in the controller synthesis. In conclusion we suggested the solutions of regulators synthesis tasks with customizable settings for speed and switchable structure between relay λ and PI regulators.

AB - In this paper we consider the problem of speed in hot water systems where highly efficient plate heat exchanger is used. Especially marked the problem which is connected with long transition drive of constant speed exceeding the time of the heat exchanger accumulative tank emptying more than twice. As a regulating element in the heat exchange system there was proposed to use asynchronous electric drive of pressure pump in the primary circuit of the heat exchanger. For correct use of such electric drive we solved the problem of control object mathematical model synthesis, which has non-linear properties, in particular, the transfer coefficient of the circuit can vary in more than 6 times. At the same time there was revealed the dependence of the transfer coefficient on the motor speed, which must be considered in the controller synthesis. In conclusion we suggested the solutions of regulators synthesis tasks with customizable settings for speed and switchable structure between relay λ and PI regulators.

UR - http://www.scopus.com/inward/record.url?scp=85008627393&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85008627393&partnerID=8YFLogxK

U2 - 10.1051/matecconf/20179101043

DO - 10.1051/matecconf/20179101043

M3 - Article

AN - SCOPUS:85008627393

VL - 91

JO - MATEC Web of Conferences

JF - MATEC Web of Conferences

M1 - 01043

ER -