Potassium layered polytitanates influence on low-pressure polyethylene properties in wide concentrations range

Igor Burmistrov, Lidiya Panova, Alexey Shevelev, Anna Ermolenko, Igor Ilinykh, Anna Godymchuk

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Thermoplastic composites based on low-pressure polyethylene and layered potassium titanates have been made in the work. We have shown the possibility to processing the composites into the products by injection molding at polytitanates content up to 50%wt. Technological properties of composites at low concentrations of filler are established. Layered potassium polytitanates influence on the mechanical and thermophysical properties of low-pressure polyethylene in a wide range of concentrations is investigated: from 1 to 50 %wt. Essential increase of complex of mechanical properties of polyethylene at introduction of small amounts of layered potassium polytitanates is shown. Due to the layered structure of the potassium polytitanates with particle size of about 500 nm in diameter and a thickness of less than 10 nm durability to shock loads increase comparable to the results of the introduction of fibrous potassium hexatitanates is reached.

Original languageEnglish
Title of host publicationProspects of Fundamental Sciences Development, PFSD-2016: Proceedings of the XIII International Conference of Students and Young Scientists
Subtitle of host publicationProceedings of the XIII International Conference of Students and Young Scientists
PublisherAmerican Institute of Physics Inc.
Volume1772
ISBN (Electronic)9780735414303
DOIs
Publication statusPublished - 13 Oct 2016
Event13th International Conference of Students and Young Scientists on Prospects of Fundamental Sciences Development, PFSD 2016 - Tomsk, Russian Federation
Duration: 26 Apr 201629 Apr 2016

Conference

Conference13th International Conference of Students and Young Scientists on Prospects of Fundamental Sciences Development, PFSD 2016
CountryRussian Federation
CityTomsk
Period26.4.1629.4.16

Fingerprint

polyethylenes
potassium
low pressure
composite materials
shock loads
mechanical properties
titanates
injection molding
thermophysical properties
durability
fillers
low concentrations
products

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Cite this

Burmistrov, I., Panova, L., Shevelev, A., Ermolenko, A., Ilinykh, I., & Godymchuk, A. (2016). Potassium layered polytitanates influence on low-pressure polyethylene properties in wide concentrations range. In Prospects of Fundamental Sciences Development, PFSD-2016: Proceedings of the XIII International Conference of Students and Young Scientists: Proceedings of the XIII International Conference of Students and Young Scientists (Vol. 1772). [030012] American Institute of Physics Inc.. https://doi.org/10.1063/1.4964550

Potassium layered polytitanates influence on low-pressure polyethylene properties in wide concentrations range. / Burmistrov, Igor; Panova, Lidiya; Shevelev, Alexey; Ermolenko, Anna; Ilinykh, Igor; Godymchuk, Anna.

Prospects of Fundamental Sciences Development, PFSD-2016: Proceedings of the XIII International Conference of Students and Young Scientists: Proceedings of the XIII International Conference of Students and Young Scientists. Vol. 1772 American Institute of Physics Inc., 2016. 030012.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Burmistrov, I, Panova, L, Shevelev, A, Ermolenko, A, Ilinykh, I & Godymchuk, A 2016, Potassium layered polytitanates influence on low-pressure polyethylene properties in wide concentrations range. in Prospects of Fundamental Sciences Development, PFSD-2016: Proceedings of the XIII International Conference of Students and Young Scientists: Proceedings of the XIII International Conference of Students and Young Scientists. vol. 1772, 030012, American Institute of Physics Inc., 13th International Conference of Students and Young Scientists on Prospects of Fundamental Sciences Development, PFSD 2016, Tomsk, Russian Federation, 26.4.16. https://doi.org/10.1063/1.4964550
Burmistrov I, Panova L, Shevelev A, Ermolenko A, Ilinykh I, Godymchuk A. Potassium layered polytitanates influence on low-pressure polyethylene properties in wide concentrations range. In Prospects of Fundamental Sciences Development, PFSD-2016: Proceedings of the XIII International Conference of Students and Young Scientists: Proceedings of the XIII International Conference of Students and Young Scientists. Vol. 1772. American Institute of Physics Inc. 2016. 030012 https://doi.org/10.1063/1.4964550
Burmistrov, Igor ; Panova, Lidiya ; Shevelev, Alexey ; Ermolenko, Anna ; Ilinykh, Igor ; Godymchuk, Anna. / Potassium layered polytitanates influence on low-pressure polyethylene properties in wide concentrations range. Prospects of Fundamental Sciences Development, PFSD-2016: Proceedings of the XIII International Conference of Students and Young Scientists: Proceedings of the XIII International Conference of Students and Young Scientists. Vol. 1772 American Institute of Physics Inc., 2016.
@inproceedings{eef2731544b94cf4b9bddc75e7f5b776,
title = "Potassium layered polytitanates influence on low-pressure polyethylene properties in wide concentrations range",
abstract = "Thermoplastic composites based on low-pressure polyethylene and layered potassium titanates have been made in the work. We have shown the possibility to processing the composites into the products by injection molding at polytitanates content up to 50{\%}wt. Technological properties of composites at low concentrations of filler are established. Layered potassium polytitanates influence on the mechanical and thermophysical properties of low-pressure polyethylene in a wide range of concentrations is investigated: from 1 to 50 {\%}wt. Essential increase of complex of mechanical properties of polyethylene at introduction of small amounts of layered potassium polytitanates is shown. Due to the layered structure of the potassium polytitanates with particle size of about 500 nm in diameter and a thickness of less than 10 nm durability to shock loads increase comparable to the results of the introduction of fibrous potassium hexatitanates is reached.",
author = "Igor Burmistrov and Lidiya Panova and Alexey Shevelev and Anna Ermolenko and Igor Ilinykh and Anna Godymchuk",
year = "2016",
month = "10",
day = "13",
doi = "10.1063/1.4964550",
language = "English",
volume = "1772",
booktitle = "Prospects of Fundamental Sciences Development, PFSD-2016: Proceedings of the XIII International Conference of Students and Young Scientists",
publisher = "American Institute of Physics Inc.",

}

TY - GEN

T1 - Potassium layered polytitanates influence on low-pressure polyethylene properties in wide concentrations range

AU - Burmistrov, Igor

AU - Panova, Lidiya

AU - Shevelev, Alexey

AU - Ermolenko, Anna

AU - Ilinykh, Igor

AU - Godymchuk, Anna

PY - 2016/10/13

Y1 - 2016/10/13

N2 - Thermoplastic composites based on low-pressure polyethylene and layered potassium titanates have been made in the work. We have shown the possibility to processing the composites into the products by injection molding at polytitanates content up to 50%wt. Technological properties of composites at low concentrations of filler are established. Layered potassium polytitanates influence on the mechanical and thermophysical properties of low-pressure polyethylene in a wide range of concentrations is investigated: from 1 to 50 %wt. Essential increase of complex of mechanical properties of polyethylene at introduction of small amounts of layered potassium polytitanates is shown. Due to the layered structure of the potassium polytitanates with particle size of about 500 nm in diameter and a thickness of less than 10 nm durability to shock loads increase comparable to the results of the introduction of fibrous potassium hexatitanates is reached.

AB - Thermoplastic composites based on low-pressure polyethylene and layered potassium titanates have been made in the work. We have shown the possibility to processing the composites into the products by injection molding at polytitanates content up to 50%wt. Technological properties of composites at low concentrations of filler are established. Layered potassium polytitanates influence on the mechanical and thermophysical properties of low-pressure polyethylene in a wide range of concentrations is investigated: from 1 to 50 %wt. Essential increase of complex of mechanical properties of polyethylene at introduction of small amounts of layered potassium polytitanates is shown. Due to the layered structure of the potassium polytitanates with particle size of about 500 nm in diameter and a thickness of less than 10 nm durability to shock loads increase comparable to the results of the introduction of fibrous potassium hexatitanates is reached.

UR - http://www.scopus.com/inward/record.url?scp=84994115525&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84994115525&partnerID=8YFLogxK

U2 - 10.1063/1.4964550

DO - 10.1063/1.4964550

M3 - Conference contribution

AN - SCOPUS:84994115525

VL - 1772

BT - Prospects of Fundamental Sciences Development, PFSD-2016: Proceedings of the XIII International Conference of Students and Young Scientists

PB - American Institute of Physics Inc.

ER -