Pneumatic device of the preload and dynamic loads balancing to reduce the intensity of thermal processes in the metal cutting process

A. N. Gavrilin, B. B. Moyzes, A. I. Cherkasov, I. A. Ditenberg, A. R. Khairullin, E. V. Glinenko

Research output: Contribution to journalConference articlepeer-review

Abstract

Improved reliability of the technological system machine-tool-instrument-detail is an important current task. Backlashes and insufficient stiffness of technological system lead to intensive wear of the cutting tool, increasing the heat in the cutting zone. Due to high temperature in the thin surface layers of the workpiece and tool thermal processes may occur which are similar to release and can cause the structural changes of the material. The current article presents the final design of the device which has been developed to reduce the intensity of thermal processes in metal cutting.

Original languageEnglish
Article number012089
JournalIOP Conference Series: Materials Science and Engineering
Volume168
Issue number1
DOIs
Publication statusPublished - 7 Feb 2017
Event12th International Conference Radiation-Thermal Effects and Processes in Inorganic Materials - Tomsk, Russian Federation
Duration: 4 Sep 201612 Sep 2016

ASJC Scopus subject areas

  • Materials Science(all)
  • Engineering(all)

Fingerprint Dive into the research topics of 'Pneumatic device of the preload and dynamic loads balancing to reduce the intensity of thermal processes in the metal cutting process'. Together they form a unique fingerprint.

Cite this