The paper outlines peculiarities of structure formation, phase and chemical composition in regard to heat content in molten electrode metal beads when pipe steel (steel 09G2S) welding using power sources with various energy characteristics. Mathematical calculations indicate an inverter power source provides minor heat content into the bead of electrode metal when welding. Experimental research has pointed at 4-9 % increase in impact strength of joints produced using an inverter power source in comparison with samples produced applying a diode rectifier. The following factors can possibly give rise to the increasing impact strength: difference in microstructures of weld joints, up to 50% shortening ferritic plates in metal of weld joint, change in dimensions of ferritic grains in the heat-affected zone by as much as 17.5 %, and decrease in the extent of heat-affected zone by 50%.
|Journal||IOP Conference Series: Materials Science and Engineering|
|Publication status||Published - 5 May 2016|
|Event||All-Russia Scientific and Practical Conference on Materials Treatment: Current Problems and Solutions - Yurga, Russian Federation|
Duration: 26 Nov 2015 → 28 Nov 2015
ASJC Scopus subject areas
- Materials Science(all)