Abstract
In the paper the optimization of the control loops of the variable frequency induction motor drive for the feed screw of a flame reactor has been carried out to obtain required dynamic characteristics of the electric drive for known parameters of the plant. Simulation studies of basic control loops (current, flux-linkage and speed) are performed and dynamic parameters of control quality are presented. Results of the studies show that the obtained parameters meet requirements of the workflow and the modern variable-frequency drive based on induction motor can be implemented for actuating the feed screw of flame reactor. It should also be mentioned that transients quality factors in speed loop with input filter are better than without it.
Original language | English |
---|---|
Article number | e4 |
Journal | EAI Endorsed Transactions on Energy Web |
Volume | 17 |
Issue number | 11 |
DOIs | |
Publication status | Published - 1 Jan 2017 |
Fingerprint
Keywords
- Control loop
- Electric drive
- Optimization
- Variable frequency induction motor
ASJC Scopus subject areas
- Renewable Energy, Sustainability and the Environment
- Energy Engineering and Power Technology
- Marketing
Cite this
Optimization of the control loops of the variable frequency induction motor drive of the flame reactor feed screw. / Dementyev, Yu N.; Vajda, I.; Koyain, N. V.; Negodin, K. N.; Obraztsov, K. V.
In: EAI Endorsed Transactions on Energy Web, Vol. 17, No. 11, e4, 01.01.2017.Research output: Contribution to journal › Article
}
TY - JOUR
T1 - Optimization of the control loops of the variable frequency induction motor drive of the flame reactor feed screw
AU - Dementyev, Yu N.
AU - Vajda, I.
AU - Koyain, N. V.
AU - Negodin, K. N.
AU - Obraztsov, K. V.
PY - 2017/1/1
Y1 - 2017/1/1
N2 - In the paper the optimization of the control loops of the variable frequency induction motor drive for the feed screw of a flame reactor has been carried out to obtain required dynamic characteristics of the electric drive for known parameters of the plant. Simulation studies of basic control loops (current, flux-linkage and speed) are performed and dynamic parameters of control quality are presented. Results of the studies show that the obtained parameters meet requirements of the workflow and the modern variable-frequency drive based on induction motor can be implemented for actuating the feed screw of flame reactor. It should also be mentioned that transients quality factors in speed loop with input filter are better than without it.
AB - In the paper the optimization of the control loops of the variable frequency induction motor drive for the feed screw of a flame reactor has been carried out to obtain required dynamic characteristics of the electric drive for known parameters of the plant. Simulation studies of basic control loops (current, flux-linkage and speed) are performed and dynamic parameters of control quality are presented. Results of the studies show that the obtained parameters meet requirements of the workflow and the modern variable-frequency drive based on induction motor can be implemented for actuating the feed screw of flame reactor. It should also be mentioned that transients quality factors in speed loop with input filter are better than without it.
KW - Control loop
KW - Electric drive
KW - Optimization
KW - Variable frequency induction motor
UR - http://www.scopus.com/inward/record.url?scp=85023176005&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=85023176005&partnerID=8YFLogxK
U2 - 10.4108/eai.11-7-2017.152765
DO - 10.4108/eai.11-7-2017.152765
M3 - Article
AN - SCOPUS:85023176005
VL - 17
JO - EAI Endorsed Transactions on Energy Web
JF - EAI Endorsed Transactions on Energy Web
SN - 2032-944X
IS - 11
M1 - e4
ER -