Abstract
The paper is aimed at studying the impact of initial conditions of electrical explosion of wires on energy characteristics of the explosion and some other properties of the obtained aluminum powders. Explosion modes where the energy input into the wire has the maximal level were found. These modes are optimal for fabrication of powders with the best properties. The powders have the highest value of the specific surface of 14.5 m2/g, a narrow histogram of the particle size distribution, and a narrow distribution histogram with a high polydispersity coefficient of 0.7.
| Original language | English |
|---|---|
| Article number | 1738949 |
| Journal | Advances in Materials Science and Engineering |
| Volume | 2017 |
| DOIs | |
| Publication status | Published - 2017 |
Fingerprint
ASJC Scopus subject areas
- Materials Science(all)
- Engineering(all)
Cite this
Optimal Modes for the Fabrication of Aluminum Nanopowders by the Electrical Explosion of Wires. / Pustovalov, Alexei; An, Vladimir; Kim, Jin Chun.
In: Advances in Materials Science and Engineering, Vol. 2017, 1738949, 2017.Research output: Contribution to journal › Article
}
TY - JOUR
T1 - Optimal Modes for the Fabrication of Aluminum Nanopowders by the Electrical Explosion of Wires
AU - Pustovalov, Alexei
AU - An, Vladimir
AU - Kim, Jin Chun
PY - 2017
Y1 - 2017
N2 - The paper is aimed at studying the impact of initial conditions of electrical explosion of wires on energy characteristics of the explosion and some other properties of the obtained aluminum powders. Explosion modes where the energy input into the wire has the maximal level were found. These modes are optimal for fabrication of powders with the best properties. The powders have the highest value of the specific surface of 14.5 m2/g, a narrow histogram of the particle size distribution, and a narrow distribution histogram with a high polydispersity coefficient of 0.7.
AB - The paper is aimed at studying the impact of initial conditions of electrical explosion of wires on energy characteristics of the explosion and some other properties of the obtained aluminum powders. Explosion modes where the energy input into the wire has the maximal level were found. These modes are optimal for fabrication of powders with the best properties. The powders have the highest value of the specific surface of 14.5 m2/g, a narrow histogram of the particle size distribution, and a narrow distribution histogram with a high polydispersity coefficient of 0.7.
UR - http://www.scopus.com/inward/record.url?scp=85013403097&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=85013403097&partnerID=8YFLogxK
U2 - 10.1155/2017/1738949
DO - 10.1155/2017/1738949
M3 - Article
AN - SCOPUS:85013403097
VL - 2017
JO - Advances in Materials Science and Engineering
JF - Advances in Materials Science and Engineering
SN - 1687-8434
M1 - 1738949
ER -