Abstract
In this paper we report about fabrication and properties of polymethylmethacrylate doped with Er3+ and Yb3+ ions. The reported layers were fabricated by spin coating onto Si, Si/SiO2 or onto glass substrates. For the Er and Yb doping ErCl3 and YbCl 3 or ErF3 and YbF3 powder dissolved in C 5H9NO or C2H6OS were used. The research was focused on investigation of the influence of the amount of the dopants on the photoluminescence spectra at 1.55 μm. It was found that the increasing Er3+ content increased the intensity of the luminescence and that co-doping with ytterbium ions increased the intensity of the luminescence as well.
| Original language | English |
|---|---|
| Article number | 012021 |
| Journal | Journal of Physics: Conference Series |
| Volume | 100 |
| Issue number | 1 |
| DOIs | |
| Publication status | Published - 1 Mar 2008 |
| Externally published | Yes |
Fingerprint
ASJC Scopus subject areas
- Physics and Astronomy(all)
Cite this
Optical properties of PMMA polymer doped with Er3+ and Er 3+/Yb3+ ions. / Prajzler, V.; Huttel, I.; Lyutakov, O.; Spirkova, J.; Oswald, J.; Burian, Z.; Jerabek, V.
In: Journal of Physics: Conference Series, Vol. 100, No. 1, 012021, 01.03.2008.Research output: Contribution to journal › Article
}
TY - JOUR
T1 - Optical properties of PMMA polymer doped with Er3+ and Er 3+/Yb3+ ions
AU - Prajzler, V.
AU - Huttel, I.
AU - Lyutakov, O.
AU - Spirkova, J.
AU - Oswald, J.
AU - Burian, Z.
AU - Jerabek, V.
PY - 2008/3/1
Y1 - 2008/3/1
N2 - In this paper we report about fabrication and properties of polymethylmethacrylate doped with Er3+ and Yb3+ ions. The reported layers were fabricated by spin coating onto Si, Si/SiO2 or onto glass substrates. For the Er and Yb doping ErCl3 and YbCl 3 or ErF3 and YbF3 powder dissolved in C 5H9NO or C2H6OS were used. The research was focused on investigation of the influence of the amount of the dopants on the photoluminescence spectra at 1.55 μm. It was found that the increasing Er3+ content increased the intensity of the luminescence and that co-doping with ytterbium ions increased the intensity of the luminescence as well.
AB - In this paper we report about fabrication and properties of polymethylmethacrylate doped with Er3+ and Yb3+ ions. The reported layers were fabricated by spin coating onto Si, Si/SiO2 or onto glass substrates. For the Er and Yb doping ErCl3 and YbCl 3 or ErF3 and YbF3 powder dissolved in C 5H9NO or C2H6OS were used. The research was focused on investigation of the influence of the amount of the dopants on the photoluminescence spectra at 1.55 μm. It was found that the increasing Er3+ content increased the intensity of the luminescence and that co-doping with ytterbium ions increased the intensity of the luminescence as well.
UR - http://www.scopus.com/inward/record.url?scp=44649189283&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=44649189283&partnerID=8YFLogxK
U2 - 10.1088/1742-6596/100/1/012021
DO - 10.1088/1742-6596/100/1/012021
M3 - Article
AN - SCOPUS:44649189283
VL - 100
JO - Journal of Physics: Conference Series
JF - Journal of Physics: Conference Series
SN - 1742-6588
IS - 1
M1 - 012021
ER -