Abstract
The obtained results show that using an electron beam wire feed process makes it possible to manufacture axially symmetric articles which metal strength is close to this of conventionally made ones. However, it is necessary to optimize the process parameters and thus provide forming the desired microstructure with or without the anisotropy.
| Original language | English |
|---|---|
| Article number | 042044 |
| Journal | Journal of Physics: Conference Series |
| Volume | 1115 |
| Issue number | 4 |
| DOIs | |
| Publication status | Published - 27 Nov 2018 |
| Event | 6th International Congress on Energy Fluxes and Radiation Effects 2018, EFRE 2018 - Tomsk, Russian Federation Duration: 16 Sep 2018 → 22 Sep 2018 |
ASJC Scopus subject areas
- Physics and Astronomy(all)
Fingerprint Dive into the research topics of 'On the problem of formation of articles with specified properties by the method of electron beam freeform fabrication'. Together they form a unique fingerprint.
Cite this
Filippov, A. V., Fortuna, S. V., Gurianov, D. A., & Kalashnikov, K. N. (2018). On the problem of formation of articles with specified properties by the method of electron beam freeform fabrication. Journal of Physics: Conference Series, 1115(4), [042044]. https://doi.org/10.1088/1742-6596/1115/4/042044