Obtaining and characterisation of high entropy alloys used for medical applications

V. Geantǎ, I. Voiculescu, R. Ştefǎnoiu, M. Codescu, H. Kelemen, G. Pavel, A. Vlǎdescu, V. A. Sandu

Research output: Contribution to journalConference article

Abstract

The experimental CrFeMoNbTaTiZr alloys were designed based on the extremely low bio-toxicity of the chemical elements. They are currently used as a basis for alloying of classical alloys used in medical device manufacturing. From this alloying system, were obtained in a Vacuum Arc Remelting (VAR) equipment six alloys: CrFeMoNbTaTi, CrFeMoNbTaZr, CrFeMoTaTiZr, CrFeTaNbTiZr, CrTaNbTiZrMo and FeTaNbTiZrMo. The microstructural analysis of the obtained alloys have been performed by optical and SEM microscopy. The microhardness tests show results in the range of 575-1337 HV0.2/10. In order to improve the mechanical properties heat treatment procedures have been applied.

Original languageEnglish
Article number012023
JournalIOP Conference Series: Materials Science and Engineering
Volume572
Issue number1
DOIs
Publication statusPublished - 2 Aug 2019
Externally publishedYes
Event2019 International Conference on Innovative Research, ICIR EUROINVENT 2019 - Iasi, Romania
Duration: 16 May 201917 May 2019

Fingerprint

Medical applications
Entropy
Alloying
Remelting
Chemical elements
Microhardness
Toxicity
Microscopic examination
Heat treatment
Vacuum
Mechanical properties
Scanning electron microscopy

ASJC Scopus subject areas

  • Materials Science(all)
  • Engineering(all)

Cite this

Geantǎ, V., Voiculescu, I., Ştefǎnoiu, R., Codescu, M., Kelemen, H., Pavel, G., ... Sandu, V. A. (2019). Obtaining and characterisation of high entropy alloys used for medical applications. IOP Conference Series: Materials Science and Engineering, 572(1), [012023]. https://doi.org/10.1088/1757-899X/572/1/012023

Obtaining and characterisation of high entropy alloys used for medical applications. / Geantǎ, V.; Voiculescu, I.; Ştefǎnoiu, R.; Codescu, M.; Kelemen, H.; Pavel, G.; Vlǎdescu, A.; Sandu, V. A.

In: IOP Conference Series: Materials Science and Engineering, Vol. 572, No. 1, 012023, 02.08.2019.

Research output: Contribution to journalConference article

Geantǎ, V. ; Voiculescu, I. ; Ştefǎnoiu, R. ; Codescu, M. ; Kelemen, H. ; Pavel, G. ; Vlǎdescu, A. ; Sandu, V. A. / Obtaining and characterisation of high entropy alloys used for medical applications. In: IOP Conference Series: Materials Science and Engineering. 2019 ; Vol. 572, No. 1.
@article{a17d1476cc6f4824a811302a331c6a08,
title = "Obtaining and characterisation of high entropy alloys used for medical applications",
abstract = "The experimental CrFeMoNbTaTiZr alloys were designed based on the extremely low bio-toxicity of the chemical elements. They are currently used as a basis for alloying of classical alloys used in medical device manufacturing. From this alloying system, were obtained in a Vacuum Arc Remelting (VAR) equipment six alloys: CrFeMoNbTaTi, CrFeMoNbTaZr, CrFeMoTaTiZr, CrFeTaNbTiZr, CrTaNbTiZrMo and FeTaNbTiZrMo. The microstructural analysis of the obtained alloys have been performed by optical and SEM microscopy. The microhardness tests show results in the range of 575-1337 HV0.2/10. In order to improve the mechanical properties heat treatment procedures have been applied.",
author = "V. Geantǎ and I. Voiculescu and R. Ştefǎnoiu and M. Codescu and H. Kelemen and G. Pavel and A. Vlǎdescu and Sandu, {V. A.}",
year = "2019",
month = "8",
day = "2",
doi = "10.1088/1757-899X/572/1/012023",
language = "English",
volume = "572",
journal = "IOP Conference Series: Materials Science and Engineering",
issn = "1757-8981",
publisher = "IOP Publishing Ltd.",
number = "1",

}

TY - JOUR

T1 - Obtaining and characterisation of high entropy alloys used for medical applications

AU - Geantǎ, V.

AU - Voiculescu, I.

AU - Ştefǎnoiu, R.

AU - Codescu, M.

AU - Kelemen, H.

AU - Pavel, G.

AU - Vlǎdescu, A.

AU - Sandu, V. A.

PY - 2019/8/2

Y1 - 2019/8/2

N2 - The experimental CrFeMoNbTaTiZr alloys were designed based on the extremely low bio-toxicity of the chemical elements. They are currently used as a basis for alloying of classical alloys used in medical device manufacturing. From this alloying system, were obtained in a Vacuum Arc Remelting (VAR) equipment six alloys: CrFeMoNbTaTi, CrFeMoNbTaZr, CrFeMoTaTiZr, CrFeTaNbTiZr, CrTaNbTiZrMo and FeTaNbTiZrMo. The microstructural analysis of the obtained alloys have been performed by optical and SEM microscopy. The microhardness tests show results in the range of 575-1337 HV0.2/10. In order to improve the mechanical properties heat treatment procedures have been applied.

AB - The experimental CrFeMoNbTaTiZr alloys were designed based on the extremely low bio-toxicity of the chemical elements. They are currently used as a basis for alloying of classical alloys used in medical device manufacturing. From this alloying system, were obtained in a Vacuum Arc Remelting (VAR) equipment six alloys: CrFeMoNbTaTi, CrFeMoNbTaZr, CrFeMoTaTiZr, CrFeTaNbTiZr, CrTaNbTiZrMo and FeTaNbTiZrMo. The microstructural analysis of the obtained alloys have been performed by optical and SEM microscopy. The microhardness tests show results in the range of 575-1337 HV0.2/10. In order to improve the mechanical properties heat treatment procedures have been applied.

UR - http://www.scopus.com/inward/record.url?scp=85070595222&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85070595222&partnerID=8YFLogxK

U2 - 10.1088/1757-899X/572/1/012023

DO - 10.1088/1757-899X/572/1/012023

M3 - Conference article

AN - SCOPUS:85070595222

VL - 572

JO - IOP Conference Series: Materials Science and Engineering

JF - IOP Conference Series: Materials Science and Engineering

SN - 1757-8981

IS - 1

M1 - 012023

ER -