Numerical simulation of synthesis gas incineration

Research output: Contribution to journalConference article

3 Citations (Scopus)

Abstract

The authors have analysed the expediency of the suggested low-grade fuels application method. Thermal processing of solid raw materials in the gaseous fuel, called synthesis gas, is investigated. The technical challenges concerning the applicability of the existing gas equipment developed and extensively tested exclusively for natural gas were considered. For this purpose computer simulation of three-dimensional syngas-incinerating flame dynamics was performed by means of the ANSYS Multiphysics engineering software. The subjects of studying were: a three-dimensional aerodynamic flame structure, heat-release and temperature fields, a set of combustion properties: a flare range and the concentration distribution of burnout reagents. The obtained results were presented in the form of a time-averaged pathlines with color indexing. The obtained results can be used for qualitative and quantitative evaluation of complex multicomponent gas incineration singularities.

Original languageEnglish
Article number012110
JournalIOP Conference Series: Materials Science and Engineering
Volume124
Issue number1
DOIs
Publication statusPublished - 2 Jun 2016
EventInternational Conference on Mechanical Engineering, Automation and Control Systems 2015, MEACS 2015 - Tomsk, Russian Federation
Duration: 1 Dec 20154 Dec 2015

ASJC Scopus subject areas

  • Materials Science(all)
  • Engineering(all)

Fingerprint Dive into the research topics of 'Numerical simulation of synthesis gas incineration'. Together they form a unique fingerprint.

  • Cite this