Abstract
A study was conducted to demonstrate nucleate boiling in pure-water and salt-water droplets. The horizontal surface of the cylinder fabricated of copper with a low content of O2 was polished, and a micron gold layer was plasma-deposited. The boiling of droplets was implemented on the horizontal heated surface of the wall in the air atmosphere. The wall temperature was supported constant and measured by thermocouples located near the wall. The temperature at the surface of droplets was measured by a NEC-San Instruments thermovisor. The roughness state of the wall was characterized with the help of an electron microscope.
| Original language | English |
|---|---|
| Pages (from-to) | 441-445 |
| Number of pages | 5 |
| Journal | Doklady Physics |
| Volume | 59 |
| Issue number | 10 |
| DOIs | |
| Publication status | Published - 2014 |
| Externally published | Yes |
Fingerprint
ASJC Scopus subject areas
- Computational Mechanics
- Mechanics of Materials
- Physics and Astronomy(all)
Cite this
Nucleate boiling in pure-water and salt-water droplets. / Nakoryakov, V. E.; Misyura, S. Ya.
In: Doklady Physics, Vol. 59, No. 10, 2014, p. 441-445.Research output: Contribution to journal › Article
}
TY - JOUR
T1 - Nucleate boiling in pure-water and salt-water droplets
AU - Nakoryakov, V. E.
AU - Misyura, S. Ya
PY - 2014
Y1 - 2014
N2 - A study was conducted to demonstrate nucleate boiling in pure-water and salt-water droplets. The horizontal surface of the cylinder fabricated of copper with a low content of O2 was polished, and a micron gold layer was plasma-deposited. The boiling of droplets was implemented on the horizontal heated surface of the wall in the air atmosphere. The wall temperature was supported constant and measured by thermocouples located near the wall. The temperature at the surface of droplets was measured by a NEC-San Instruments thermovisor. The roughness state of the wall was characterized with the help of an electron microscope.
AB - A study was conducted to demonstrate nucleate boiling in pure-water and salt-water droplets. The horizontal surface of the cylinder fabricated of copper with a low content of O2 was polished, and a micron gold layer was plasma-deposited. The boiling of droplets was implemented on the horizontal heated surface of the wall in the air atmosphere. The wall temperature was supported constant and measured by thermocouples located near the wall. The temperature at the surface of droplets was measured by a NEC-San Instruments thermovisor. The roughness state of the wall was characterized with the help of an electron microscope.
UR - http://www.scopus.com/inward/record.url?scp=84920280199&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=84920280199&partnerID=8YFLogxK
U2 - 10.1134/S1028335814100048
DO - 10.1134/S1028335814100048
M3 - Article
AN - SCOPUS:84920280199
VL - 59
SP - 441
EP - 445
JO - Doklady Physics
JF - Doklady Physics
SN - 1028-3358
IS - 10
ER -