Modeling arc spraying process for eccentric sleeve of cone crusher gp 500 using computer-aided design

Saulekul Aizhambaeva, Gulnara Zhetessova, Tatyana Nikonova, Galina Vavilova, Michael Belik

Research output: Contribution to journalArticlepeer-review

Abstract

This article deals with studying the technology of electric arc spraying of the eccentric body by selection of the copper-steel pseudo-alloy for spraying a covering. The part durability with the placed covering depends on the technology of spraying and the properties of the sprayed material. By increasing the strength of adhesion of the covering to the base it is possible to establish the optimal indicators of the coating mode. It became the main criterion of studying the arc spraying technology from the mathematical point of view.

Original languageEnglish
Pages (from-to)343-355
Number of pages13
JournalMaterials Science Forum
Volume970
DOIs
Publication statusPublished - 2019

Keywords

  • Adhesion
  • Arc spraying
  • Coating
  • Computer modeling
  • Computer-aided design
  • Durability
  • Eccentric body
  • Mechanical engineering
  • Pseudo-alloy
  • Spraying a covering
  • Technological process

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

Fingerprint Dive into the research topics of 'Modeling arc spraying process for eccentric sleeve of cone crusher gp 500 using computer-aided design'. Together they form a unique fingerprint.

Cite this