Microstructure investigation of 13Cr-2Mo ODS steel components obtained by high voltage electric discharge compaction technique

Igor Bogachev, Artem Yudin, Evgeniy Grigoryev, Ivan Chernov, Maxim Staltsov, Oleg Khasanov, Eugene Olevsky

Research output: Contribution to journalArticle

4 Citations (Scopus)

Abstract

Refractory oxide dispersion strengthened 13Cr-2Mo steel powder was successfully consolidated to near theoretical density using high voltage electric discharge compaction. Cylindrical samples with relative density from 90% to 97% and dimensions of 10 mm in diameter and 10-15mmin height were obtained. Consolidation conditions such as pressure and voltage were varied in some ranges to determine the optimal compaction regime. Three different concentrations of yttria were used to identify its effect on the properties of the samples. It is shown that the utilized ultra-rapid consolidation process in combination with high transmitted energy allows obtaining high density compacts, retaining the initial structure with minimal grain growth. The experimental results indicate some heterogeneity of the structure which may occur in the external layers of the tested samples due to various thermal and electromagnetic in-processing effects. The choice of the optimal parameters of the consolidation enables obtaining samples of acceptable quality.

Original languageEnglish
Pages (from-to)7342-7353
Number of pages12
JournalMaterials
Volume8
Issue number11
DOIs
Publication statusPublished - 2015

Fingerprint

Electric discharges
Steel
Consolidation
Compaction
Microstructure
Electric potential
Yttrium oxide
Grain growth
Refractory materials
Powders
Oxides
Processing

Keywords

  • Field-assisted
  • Oxide dispersion strengthening
  • Powder consolidation
  • Steel

ASJC Scopus subject areas

  • Materials Science(all)

Cite this

Microstructure investigation of 13Cr-2Mo ODS steel components obtained by high voltage electric discharge compaction technique. / Bogachev, Igor; Yudin, Artem; Grigoryev, Evgeniy; Chernov, Ivan; Staltsov, Maxim; Khasanov, Oleg; Olevsky, Eugene.

In: Materials, Vol. 8, No. 11, 2015, p. 7342-7353.

Research output: Contribution to journalArticle

Bogachev, Igor ; Yudin, Artem ; Grigoryev, Evgeniy ; Chernov, Ivan ; Staltsov, Maxim ; Khasanov, Oleg ; Olevsky, Eugene. / Microstructure investigation of 13Cr-2Mo ODS steel components obtained by high voltage electric discharge compaction technique. In: Materials. 2015 ; Vol. 8, No. 11. pp. 7342-7353.
@article{0286d1e910834630b93822d2d8e6a620,
title = "Microstructure investigation of 13Cr-2Mo ODS steel components obtained by high voltage electric discharge compaction technique",
abstract = "Refractory oxide dispersion strengthened 13Cr-2Mo steel powder was successfully consolidated to near theoretical density using high voltage electric discharge compaction. Cylindrical samples with relative density from 90{\%} to 97{\%} and dimensions of 10 mm in diameter and 10-15mmin height were obtained. Consolidation conditions such as pressure and voltage were varied in some ranges to determine the optimal compaction regime. Three different concentrations of yttria were used to identify its effect on the properties of the samples. It is shown that the utilized ultra-rapid consolidation process in combination with high transmitted energy allows obtaining high density compacts, retaining the initial structure with minimal grain growth. The experimental results indicate some heterogeneity of the structure which may occur in the external layers of the tested samples due to various thermal and electromagnetic in-processing effects. The choice of the optimal parameters of the consolidation enables obtaining samples of acceptable quality.",
keywords = "Field-assisted, Oxide dispersion strengthening, Powder consolidation, Steel",
author = "Igor Bogachev and Artem Yudin and Evgeniy Grigoryev and Ivan Chernov and Maxim Staltsov and Oleg Khasanov and Eugene Olevsky",
year = "2015",
doi = "10.3390/ma8115381",
language = "English",
volume = "8",
pages = "7342--7353",
journal = "Materials",
issn = "1996-1944",
publisher = "MDPI AG",
number = "11",

}

TY - JOUR

T1 - Microstructure investigation of 13Cr-2Mo ODS steel components obtained by high voltage electric discharge compaction technique

AU - Bogachev, Igor

AU - Yudin, Artem

AU - Grigoryev, Evgeniy

AU - Chernov, Ivan

AU - Staltsov, Maxim

AU - Khasanov, Oleg

AU - Olevsky, Eugene

PY - 2015

Y1 - 2015

N2 - Refractory oxide dispersion strengthened 13Cr-2Mo steel powder was successfully consolidated to near theoretical density using high voltage electric discharge compaction. Cylindrical samples with relative density from 90% to 97% and dimensions of 10 mm in diameter and 10-15mmin height were obtained. Consolidation conditions such as pressure and voltage were varied in some ranges to determine the optimal compaction regime. Three different concentrations of yttria were used to identify its effect on the properties of the samples. It is shown that the utilized ultra-rapid consolidation process in combination with high transmitted energy allows obtaining high density compacts, retaining the initial structure with minimal grain growth. The experimental results indicate some heterogeneity of the structure which may occur in the external layers of the tested samples due to various thermal and electromagnetic in-processing effects. The choice of the optimal parameters of the consolidation enables obtaining samples of acceptable quality.

AB - Refractory oxide dispersion strengthened 13Cr-2Mo steel powder was successfully consolidated to near theoretical density using high voltage electric discharge compaction. Cylindrical samples with relative density from 90% to 97% and dimensions of 10 mm in diameter and 10-15mmin height were obtained. Consolidation conditions such as pressure and voltage were varied in some ranges to determine the optimal compaction regime. Three different concentrations of yttria were used to identify its effect on the properties of the samples. It is shown that the utilized ultra-rapid consolidation process in combination with high transmitted energy allows obtaining high density compacts, retaining the initial structure with minimal grain growth. The experimental results indicate some heterogeneity of the structure which may occur in the external layers of the tested samples due to various thermal and electromagnetic in-processing effects. The choice of the optimal parameters of the consolidation enables obtaining samples of acceptable quality.

KW - Field-assisted

KW - Oxide dispersion strengthening

KW - Powder consolidation

KW - Steel

UR - http://www.scopus.com/inward/record.url?scp=84949656069&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84949656069&partnerID=8YFLogxK

U2 - 10.3390/ma8115381

DO - 10.3390/ma8115381

M3 - Article

VL - 8

SP - 7342

EP - 7353

JO - Materials

JF - Materials

SN - 1996-1944

IS - 11

ER -